暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green PCB single-board computer with 40-pin GPIO header pre-soldered, compact rectangular form factor

Bazarc

Bazarc Raspberry Pi Zero WH Pre-Soldered Header 40 GPIO 512 MB BCM2835 1 GHz

SKU CH-PYVC-4PSFP

Compact single-board computer with pre-soldered 40-pin GPIO, wireless connectivity and 512 MB RAM for embedded projects

  • TypeOther
  • Compact 12 x 2.3 x 7.2 cm board fits tight enclosures
  • 40 pre-soldered GPIO pins enable instant HAT compatibility
  • BCM2835 overclocked to 1 GHz boosts processing speed
  • 512 MB RAM supports multitasking on lightweight Linux
  • Built-in Wi-Fi and Bluetooth simplify wireless integration

Compact Raspberry Pi Zero WH with Pre-Soldered GPIO

The Bazarc Raspberry Pi Zero WH ships with a 40-pin GPIO header already soldered in place, removing the need for manual assembly. It targets makers and developers who want a ready-to-use wireless board for embedded projects. The BCM2835 processor runs at 1 GHz alongside 512 MB of RAM, and the board includes integrated Wi-Fi and Bluetooth for connectivity.

Passive Thermals and Low Power Draw

With no active cooling fitted, the board relies on natural convection across its green PCB. The overclocked BCM2835 operates within typical Raspberry Pi Zero thermal limits during normal workloads, so no fan or heatsink is required. Power consumption stays modest, allowing the module to run from a standard 5 V USB supply in most on-board applications.

Upgrade from Headerless Zero Boards

This unit replaces a plain Raspberry Pi Zero or Zero W that would otherwise need a separate header soldering step. The jump is worth it when build time matters or when soldering equipment is unavailable. It is not for buyers who need more RAM, faster CPU cores, additional USB ports, or a different form factor than the Zero footprint provides.

特長

  • Compact 12 x 2.3 x 7.2 cm board fits tight enclosures
  • 40 pre-soldered GPIO pins enable instant HAT compatibility
  • BCM2835 overclocked to 1 GHz boosts processing speed
  • 512 MB RAM supports multitasking on lightweight Linux
  • Built-in Wi-Fi and Bluetooth simplify wireless integration

仕様

TypeOther

この商品に関する質問

How do I fit the pre-soldered 40-pin GPIO header onto a HAT or pHAT without bending the pins?

Lower the board straight down so every pin enters its matching hole at once, then press evenly across the PCB until the header seats fully.

What part of the board will need attention first after months of continuous operation?

The green PCB can accumulate dust on the 40-pin header and the wireless chip area; clean those contacts periodically with compressed air to keep connections reliable.

Which limit appears first when the BCM2835 runs at 1 GHz under sustained load?

The 512 MB RAM ceiling is reached before the single-core processor saturates, so memory-heavy tasks will throttle performance first.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。