暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver metal 2.5-inch drive caddy tray for Lenovo ThinkServer rack models

BFKK

BFKK 03T8147 SFF 2.5" SAS/SATA SSD Caddy Tray Lenovo RD350 RD450 RD550 RD650 TD350

SKU CH-C2GA-C65N7

2.5-inch SAS/SATA drive caddy tray for Lenovo ThinkServer RD350, RD450, RD550, RD650 and TD350 rack models

  • TypeRack
  • Compatible with Lenovo ThinkServer RD350 RD450 RD550 RD650 TD350
  • Supports 2.5 inch SAS and SATA hard drives
  • FRU 03T8147 matches original part number
  • New condition caddy tray ready for installation
  • Rack type design fits server chassis

2.5" SAS/SATA Caddy for Lenovo ThinkServer

This BFKK tray fits 2.5-inch SAS or SATA drives into the front bays of compatible Lenovo ThinkServer systems. It is built for administrators who need to populate empty slots in rack-mounted servers. The caddy is sold new and ready for immediate deployment.

FRU 03T8147 confirms exact server fit

The FRU number 03T8147 matches the original Lenovo part used in RD350, RD450, RD550, RD650 and TD350 models. Only this FRU guarantees the correct latch alignment and backplane connector engagement. Using a different tray risks drive detection failures or physical damage to the bay.

Tool-less slide-in install with latch check

Insert the drive into the tray, secure it with the included screws, then slide the assembly into the bay until the latch clicks. The most common issue is an unseated latch that leaves the drive invisible to the RAID controller; always verify the activity LED lights after insertion.

特長

  • Compatible with Lenovo ThinkServer RD350 RD450 RD550 RD650 TD350
  • Supports 2.5 inch SAS and SATA hard drives
  • FRU 03T8147 matches original part number
  • New condition caddy tray ready for installation
  • Rack type design fits server chassis

仕様

TypeRack

この商品に関する質問

Will a 2.5" SAS or SATA drive fit in this caddy?

Yes, the tray is made for 2.5" drives with either SAS or SATA interface and matches the FRU 03T8147 used in the listed ThinkServer models.

Does the tray use a standard SAS/SATA backplane connection?

It connects to the server's 2.5" SAS/SATA hot-swap backplane using the native drive connector; no extra adapter is required.

Which Lenovo ThinkServer models does this tray mount in?

It fits the RD350, RD450, RD550, RD650 and TD350 chassis that accept the 03T8147 / SM10A43750 caddy.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。