暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White aluminium GPU support bracket, mini size, adjustable height 1.0-2.0 inches, magnetic base

BFKK

BFKK GPU Support Bracket Mini White 1.0-2.0

SKU CH-H2GB-K9J9J

An adjustable-height aluminium bracket with a magnetic base prevents graphics-card sag in tight builds

  • ColorWhite
  • OptionMini

Option Mini

  • All-aluminium construction resists aging and flex better than plastic
  • Adjustable screw height fits chassis from 1.0 to 2.0 inches
  • Hidden magnetic base locks securely to steel case floors
  • Three-step CNC finish delivers durable, high-gloss surface detail
  • Simple three-step install prevents graphics card sag effectively

Compact GPU Sag Bracket for Tight Builds

The BFKK Mini bracket is a height-adjustable aluminium stand that slides under a graphics card to stop PCB flex in small-form-factor cases. Its 1.0 to 2.0 inch range suits low-profile cards and cramped power-supply bays where full-size supports cannot fit. The white anodised finish matches light-themed builds without adding visual bulk.

Replaces Improvised Props and Plastic Braces

Builders who have used zip ties, foam blocks or brittle plastic arms gain a rigid metal alternative that will not creep or snap over time. The upgrade is worth it when the card overhangs the motherboard slot by more than a few millimetres and the case floor offers no mounting points. It is not for buyers who need to support dual-slot cards exceeding the 2.0 inch maximum adjustment.

Tool-Free Magnetic Base with Screw Fine-Tune

A hidden neodymium magnet anchors the foot to the steel chassis floor, while a knurled thumb screw raises the contact pad until it meets the backplate. Tightening the lock nut then locks the height. The only common issue is interference with oversized backplates or RGB shrouds that leave less than 1.0 inch of clearance beneath the card.

特長

  • All-aluminium construction resists aging and flex better than plastic
  • Adjustable screw height fits chassis from 1.0 to 2.0 inches
  • Hidden magnetic base locks securely to steel case floors
  • Three-step CNC finish delivers durable, high-gloss surface detail
  • Simple three-step install prevents graphics card sag effectively

仕様

ColorWhite
OptionMini

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What height range does the Mini bracket cover so it fits under my graphics card?

The bracket adjusts from 1.0 to 2.0 inches, matching the gap under most standard and long power-supply bay layouts.

How do I install the bracket and which step do people often miss?

Place it under the card, turn the screw up until the card is supported, then tighten the middle locking nut down — skipping the nut lets the bracket loosen over time.

Does the aluminium bracket need any lubrication or replacement parts later?

No moving bearings or plastic inserts are present; the anodised aluminium and magnet base require no maintenance and no spare parts.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。