暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular silver metal ASIC miner with built-in power supply, front fans visible

bitmain

bitmain Antminer L3++ 580Mh/s Scrypt mining hardware

SKU CH-7YJ0-TH8WV

Scrypt ASIC miner delivering 580 Mh/s at 942 W with a 220 V Bitmain power supply included

  • Scrypt mining at 580 Mh/s maximum hashrate
  • 942 W power draw for efficient operation
  • Includes original Bitmain power supply unit
  • Requires 220 V input voltage to function
  • Professional-grade hardware suited for experienced miners

Scrypt ASIC Miner

The Bitmain Antminer L3++ delivers a maximum hashrate of 580Mh/s on the Scrypt algorithm, making it suitable for mining Litecoin and Dogecoin. It draws 942W during operation and requires a 220V input supply. The unit is supplied in used-like-new condition with an original Bitmain power supply and is intended for experienced operators.

Power Requirements

A dedicated 220V circuit is mandatory because incorrect voltage can damage the hardware. The included Bitmain power supply is a used unit that matches the miner’s 942W draw, so no separate PSU sourcing is needed. Professional installation is recommended given the electrical demands and the lack of amateur-friendly safeguards.

Upgrade Considerations

This miner replaces older Scrypt hardware that cannot reach the 580Mh/s threshold at comparable power draw. The jump is worthwhile when electricity costs allow the 942W consumption to be offset by the higher throughput. Operators without access to stable 220V infrastructure or low-cost power should not adopt this platform.

特長

  • Scrypt mining at 580 Mh/s maximum hashrate
  • 942 W power draw for efficient operation
  • Includes original Bitmain power supply unit
  • Requires 220 V input voltage to function
  • Professional-grade hardware suited for experienced miners

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What hashrate does the Scrypt algorithm deliver on the Antminer L3++?

The Scrypt algorithm runs at a maximum hashrate of 580Mh/s on the Antminer L3++.

What input voltage must the L3++ receive to avoid damage?

The L3++ requires a 220V input; using a different voltage can damage the miner.

How is the Antminer L3++ installed and what step is often missed?

Connect the included Bitmain power supply to a 220V source, link the miner via Ethernet, then configure the pool settings; the step often missed is verifying the 220V supply before powering on.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。