暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver mini drain valve with black handle and two G1/4 ports, 10mm flow path, 360° rotary end

Bitspower

Bitspower BP-MVVFRIGIG14-SLBK Mini Valve 10mm G1/4 360° Rotary Silver Shining

SKU CH-39WH-ZFRWD MPN BP-MVVFRIGIG14-SLBK

A compact drain valve with a 10mm flow path, dual G1/4 threads and 360° rotary adjustment for precise loop orientation

  • TypeFittings
  • Compact mini valve saves loop space
  • 10 mm internal diameter enables high flow
  • Dual female G1/4 threads for standard fittings
  • 360° rotary design allows flexible routing
  • Silver finish with black handle resists corrosion

Mini valve for custom loops

This Bitspower mini valve integrates a drain function into a custom water-cooling loop. It suits builders who want precise flow control without adding bulk to a compact build. Buyers needing multiple drain points or a larger bore should look elsewhere.

Rotary orientation and flow control

The 360-degree rotary design on one side lets the valve face any direction for tidy tubing runs. A 10 mm inner diameter maintains high flow while the handle gives fine adjustment during filling or maintenance. No active cooling or power draw is involved.

G1/4 threads and silver finish

Two female G1/4 threads accept standard compression fittings for straightforward installation. The silver shining body with a black handle resists corrosion and matches common loop aesthetics. The compact length keeps clearance tight in small form-factor cases.

特長

  • Compact mini valve saves loop space
  • 10 mm internal diameter enables high flow
  • Dual female G1/4 threads for standard fittings
  • 360° rotary design allows flexible routing
  • Silver finish with black handle resists corrosion

仕様

TypeFittings

この商品に関する質問

How do I install the Bitspower Mini Valve and which step is most often done wrong?

Screw both female G1/4 ports into the loop fittings by hand, then snug gently with a wrench; the step people skip is checking that the 360° rotary side spins freely after tightening so the handle points where you need it.

What maintenance will this valve need later?

Operate the black handle through its full range every few months to prevent mineral build-up; if the 10 mm flow path ever feels gritty, remove the valve, rinse with distilled water and reassemble — no seals are user-replaceable.

What limit appears first during sustained use?

The 10 mm internal diameter sets the maximum flow rate; under continuous high pump speeds the pressure drop across the valve becomes the loop's primary restriction before any thermal limit is reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。