暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Straight brass tube 12mm OD 500mm black sparkle finish

Bitspower

Bitspower BP-NCBHT12BS-L500 Brass Link Tubing 12mm OD 500mm Black Sparkle

SKU CH-33XW-MGR8Y MPN BP-NCBHT12BS-L500

Brass tubing with 12mm outer diameter and 500mm length fits Bitspower C47, C48 and ML series fittings

  • TypeTubing
  • High-quality brass construction ensures durable tubing
  • 12mm outer diameter fits standard liquid-cooling loops
  • 70mm wall thickness provides structural rigidity
  • 500mm length suits custom routing needs
  • Compatible with Bitspower C47, C48 and ML series fittings

Brass Link Tubing for Custom Loops

This 12 mm outer-diameter brass tube is built for custom water-cooling loops that demand rigid, durable runs. The Black Sparkle finish adds a distinctive look while the 0.70 mm wall thickness keeps the tube strong under pressure. It is intended for builders assembling a hard-line system with matching Bitspower fittings.

Installation with C47, C48 or ML Fittings

The tube slides into compatible Bitspower C47, C48 or ML series fittings and seals with the supplied compression rings. Because the brass is rigid, you must measure and bend each length before final assembly; forcing a misaligned run will stress the O-rings and cause leaks. A proper tubing bender and deburring tool are essential to avoid kinks or rough edges that compromise the seal.

500 mm Length for Straight or Short Bent Runs

At 500 mm the tube covers typical motherboard-to-reservoir or GPU-to-radiator spans in mid-tower builds. Longer continuous runs or complex multi-bend patterns will require additional lengths and careful planning. Builders needing extended distances or tighter bend radii should verify they have enough pieces before starting the loop.

特長

  • High-quality brass construction ensures durable tubing
  • 12mm outer diameter fits standard liquid-cooling loops
  • 70mm wall thickness provides structural rigidity
  • 500mm length suits custom routing needs
  • Compatible with Bitspower C47, C48 and ML series fittings

仕様

TypeTubing

この商品に関する質問

How do I confirm the brass link tubing is seated correctly after installation?

Press each end firmly into a Bitspower C47, C48 or ML series fitting until it bottoms out; the 12 mm OD tube should show no visible gap at the collar and the 0.70 mm wall will not deform when the compression ring is tightened.

What comes in the package and which fittings must be purchased separately?

The box contains one 500 mm length of Black Sparkle brass link tubing; compatible Bitspower C47, C48 or ML series compression fittings are sold separately.

Which tubing version should I choose for a standard hard-tube loop?

Select the 12 mm OD, 500 mm Black Sparkle brass link tubing (model BP-NCBHT12BS-L500) when using Bitspower C47, C48 or ML fittings for a rigid-tube custom loop.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。