暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Brute Networks

Brute Networks 32GB DDR4-2933 2Rx4 1.2V 288-Pin Registered ECC Server RAM

SKU CH-MR4W-FZW86

32 GB DDR4-2933 registered ECC server memory with 2Rx4 organisation and 1.2 V operation

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32GB capacity handles heavy server workloads
  • DDR4-2933 speed moves data at 23400 MT/s
  • Registered ECC protects data integrity under load
  • 2V operation reduces power draw per module
  • 100% Dell compatible with major-brand chips

32GB Registered ECC DDR4 Module

This 32GB registered ECC DDR4 module is built for servers that require error-correcting memory at DDR4-2933 speed. It suits administrators maintaining Dell platforms where the 370-ADWK part number is specified.

Upgrade from non-ECC or lower-capacity DDR4

The module replaces standard unbuffered DDR4 or smaller registered sticks when data integrity and density are priorities. The jump is worth it when workloads demand the 2Rx4 organisation and 1.2V operation that match the original Dell qualification.

Limited to DDR4-2933 registered platforms

The DDR4 interface caps transfer rate at PC4-23400 and requires a registered DIMM slot with ECC support. Systems that only accept unbuffered memory or a different DDR generation cannot use this module.

特長

  • 32GB capacity handles heavy server workloads
  • DDR4-2933 speed moves data at 23400 MT/s
  • Registered ECC protects data integrity under load
  • 2V operation reduces power draw per module
  • 100% Dell compatible with major-brand chips

仕様

BrandDell
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

この商品に関する質問

Will this 288-pin DDR4 module fit my server's registered DIMM slots?

Yes, it is a 288-pin DDR4 registered DIMM designed for server memory slots that accept registered modules.

What is the correct way to seat this 2Rx4 registered DIMM during installation?

Align the notch with the slot key, press firmly straight down until both side clips click closed; the registered buffer adds height so verify the clip engages the PCB notch.

How do I know when to replace these 32GB ECC modules if errors appear?

Monitor the system event log for corrected ECC error counts; replace the module once correctable errors rise steadily or uncorrectable errors are logged.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。