EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Brute Networks
64 GB DDR4-2133 ECC load-reduced DIMM with CL15 latency and 1.2 V operation for HP-compatible servers
This 64GB module uses 288-pin DDR4 technology at 2133 MT/s with CL15 timing. It operates at 1.2V and carries ECC plus load-reduced buffering. The 4Rx4 organisation suits high-density slots in compatible HP platforms.
Align the notch with the 288-pin slot and press firmly until the latches click. Load-reduced DIMMs require motherboard support for LRDIMM technology; standard RDIMM-only boards will not recognise them. Populate slots per the server manual to keep 4Rx4 ranks within the controller limit.
This module matches HP part 726724-S21 and is built with major-brand chips. It fits administrators expanding memory in qualified HP servers. Builders needing non-ECC UDIMMs, lower capacities, or faster speeds should look at other product lines.
| Brand | HP |
|---|---|
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
Check the BIOS memory information screen or run a tool such as CPU-Z; it should report 2133 MT/s, 1.20 V, CL15 and ECC active for each 288-pin module.
The box contains the single 64GB 4Rx4 Load Reduced DIMM; no extra cables, brackets or software are supplied — compatible HP server slots are required.
Select this 64GB 4Rx4 DDR4-2133 ECC LRDIMM; it matches HP part 726724-S21 and fills one 288-pin slot with the full 64GB capacity.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?