暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

Brute Networks

Brute Networks 64GB DDR4-2933 2Rx4 1.2V 288-Pin Registered ECC Server RAM

SKU CH-N5TP-CGF2H

Adds 64GB of DDR4-2933 registered ECC memory with 2Rx4 organisation and 1.2V operation

  • Capacity64GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 64GB capacity supports large virtualised workloads
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Registered ECC design maintains data integrity under load
  • 20V operation reduces power draw per module
  • 100% HPE compatible validated for P00930-H21 systems

HPE-Compatible 64GB Registered ECC Module

This 64GB DDR4-2933 registered ECC module is built for servers that require HPE part number P00930-H21 compatibility. It uses major-brand DRAM chips and a 2Rx4 organisation to deliver 64GB of error-correcting capacity per DIMM. The 288-pin DDR4 form factor fits standard server memory slots. It is not suited for desktop platforms that cannot accept registered memory.

Sustained Load Behaviour

The module operates at 1.20V and PC4-23400 speed, maintaining data integrity through ECC during continuous workloads. Registered buffering reduces electrical load on the memory controller, helping stability when all slots are populated. All supplied modules are identically matched to avoid timing mismatches. Systems needing higher frequencies or lower latencies will not be served by this specification.

Thermals Noise and Power Draw

At 1.20V the DIMM draws minimal power per gigabyte, contributing to lower overall server power consumption. Passive operation means no fan noise is added by the memory itself. The registered design spreads electrical demand, easing thermal pressure on the memory controller. Builders targeting ultra-low-voltage or high-frequency overclocking profiles should look elsewhere.

特長

  • 64GB capacity supports large virtualised workloads
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Registered ECC design maintains data integrity under load
  • 20V operation reduces power draw per module
  • 100% HPE compatible validated for P00930-H21 systems

仕様

BrandHPE
Capacity64GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

この商品に関する質問

How much power does the 1.20V DDR4-2933 registered ECC module draw under continuous load?

The module operates at 1.20V, the standard voltage for DDR4-2933 registered ECC memory. Power draw scales with capacity and rank; this 64GB 2Rx4 DIMM will consume more than lower-density modules but stays within the DDR4 JEDEC power envelope for its speed and voltage.

What server memory slots and chipset support are required to install this 288-pin DDR4 RDIMM?

This is a 288-pin DDR4 registered ECC DIMM (PC4-23400). It requires a server platform with DDR4 RDIMM slots and a chipset that supports registered ECC memory at 2933MHz. The module is validated as 100% HPE compatible for systems using the P00930-H21 part number.

Can this 64GB 2Rx4 DDR4-2933 module be mixed with existing registered ECC DIMMs of different capacities in the same server?

Mixing different capacities and ranks is platform-dependent. This 64GB 2Rx4 module uses major-brand chips (Samsung, SK Hynix, or Micron) and is guaranteed compatible with HPE systems specifying P00930-H21; consult your server's memory population rules for supported configurations.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。