暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board DDR5 memory module with black chips and silver contacts

Brute Networks

Brute Networks 64GB DDR5-4800 2Rx4 ECC RDIMM P50312-B21

SKU CH-AT98-3WX41

A 64 GB DDR5-4800 2Rx4 ECC registered RDIMM built to HPE P50312-B21 specifications for compatible servers

  • Capacity64GB
  • Rank2Rx4
  • ChipsetMajor Brand Chipset
  • 64 GB capacity supports large memory workloads
  • DDR5-4800 speed delivers high bandwidth for servers
  • ECC registered design protects data integrity
  • 2Rx4 organisation optimises density per channel
  • 100 % HPE compatible matches P50312-B21 specification

Server Memory Module

This 64GB DDR5-4800 ECC Registered RDIMM is built for enterprise servers and workstations that require high-capacity, error-correcting memory. It uses a 2Rx4 rank configuration and operates at PC5-38400 speeds for data-intensive workloads.

Compatibility Fit

It suits administrators upgrading or repairing HPE systems using part number P50312-B21, offering 100% compatibility with a lifetime warranty. Buyers needing non-ECC unbuffered DIMMs for consumer desktops or laptops should look at something else.

Decisive Specification

The registered ECC design with 2Rx4 organisation is the single specification that decides fit; the memory controller must support registered DDR5 DIMMs for this module to function.

特長

  • 64 GB capacity supports large memory workloads
  • DDR5-4800 speed delivers high bandwidth for servers
  • ECC registered design protects data integrity
  • 2Rx4 organisation optimises density per channel
  • 100 % HPE compatible matches P50312-B21 specification

仕様

BrandHPE
Capacity64GB
Rank2Rx4
ChipsetMajor Brand Chipset

この商品に関する質問

Does this 64GB DDR5-4800 ECC RDIMM require a motherboard with registered DIMM slots and DDR5 support?

Yes, the module is a registered DDR5-4800 RDIMM and must be installed in a server board that accepts registered DDR5 memory.

Can I mix this 2Rx4 module with existing 1Rx4 or 2Rx8 DDR5 RDIMMs in the same server?

Mixing ranks is often supported but population rules vary by platform; consult the server manual for approved rank combinations per channel.

How can I verify the module is running at 4800 MT/s with ECC active after installation?

Check the BIOS memory information or use an OS tool such as dmidecode to confirm the speed shows 4800 MT/s and ECC status reads enabled.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。