SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00503901BTC
在庫あり
Brute Networks
Brute Networks A9810566 8GB DDR4-2666 ECC Registered 1Rx8 1.2V 288-Pin Server RAM
Dell-compatible 8 GB DDR4-2666 ECC registered server module with 1Rx8 organisation and 1.2 V operation
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 8GB capacity for memory-intensive server workloads
- DDR4-2666 speed with PC4-21300 bandwidth
- ECC registered design prevents data corruption
- 2V operation reduces power consumption
- 100% Dell compatible with A9810566 part number
Dell-compatible server memory
This 8 GB DDR4-2666 registered ECC module is built for Dell servers that require PC4-21300 1Rx8 memory. It targets IT teams maintaining existing infrastructure without paying OEM list prices.
8 GB capacity and registered ECC headroom
The single-rank design delivers 8 GB of error-correcting capacity at 1.2 V, suitable for virtualisation hosts and database nodes that need data integrity. Workloads exceeding 8 GB per slot or requiring higher frequencies will need larger or faster modules.
288-pin DDR4-2666 registered ECC interface
The module uses a 288-pin DDR4 interface running at 2666 MT/s with registered signalling and ECC. Systems that accept only unbuffered non-ECC memory or a different DDR generation cannot use this part.
特長
- 8GB capacity for memory-intensive server workloads
- DDR4-2666 speed with PC4-21300 bandwidth
- ECC registered design prevents data corruption
- 2V operation reduces power consumption
- 100% Dell compatible with A9810566 part number
仕様
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
この商品に関する質問
Will this DDR4-2666 ECC registered module mix with older DDR4 ECC registered sticks I already have?
This module runs at DDR4-2666 (PC4-21300) with 1.20 V, ECC and registered signalling. Mixing speeds or ranks can force the system to run at the lowest common speed, so check your existing modules match these specifications.
How can I confirm the module is running at DDR4-2666 with ECC active after installation?
Enter the server BIOS or use a tool such as dmidecode; the memory information should show 2666 MT/s, 1Rx8 organisation, registered type and ECC enabled.
What ships with the module and what must I source separately?
The box contains the single 8 GB 288-pin DDR4 SDRAM DIMM. No brackets, cables, heat spreaders or additional parts are included.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
