暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 RDIMM module with black chips

Brute Networks

Brute Networks Dell Compatible 8GB DDR4-2133 ECC Registered RDIMM 2Rx8 1.2V CL15

SKU CH-P82Z-3AN15

8GB DDR4-2133 ECC registered RDIMM with CL15 latency and 1.2V operation for compatible Dell servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Dell compatible 8 GB RDIMM for drop-in server upgrades
  • ECC registered design protects data integrity in critical workloads
  • DDR4-2133 CL15 1.20 V balances speed with low power draw
  • 2Rx8 288-pin layout fits standard DDR4 server slots
  • Major-brand Samsung SK Hynix or Micron chips meet OEM specifications

8GB DDR4-2133 ECC RDIMM for Dell Servers

This 8GB DDR4-2133 registered DIMM is built for Dell servers that require ECC error correction. The module operates at 1.20V with CL15 latency and uses a 2Rx8 organisation. It targets administrators who need to expand memory capacity on compatible platforms without replacing the entire system.

288-Pin Registered Build with Major-Brand Chips

The stick uses a 288-pin DDR4 form factor and is assembled with Samsung, SK Hynix or Micron components. Registered buffering and ECC support help maintain data integrity under sustained loads. The design meets or exceeds the original OEM specifications for the Dell YDGP4 part number.

Upgrade Path for Memory-Constrained Deployments

Adding this module reduces swapping and paging when virtual machines or databases exhaust available RAM. The jump is worthwhile when the server still has free DIMM slots and the workload is limited by capacity rather than clock speed. Buyers who need higher frequencies or larger single-module densities must look beyond this specification.

特長

  • Dell compatible 8 GB RDIMM for drop-in server upgrades
  • ECC registered design protects data integrity in critical workloads
  • DDR4-2133 CL15 1.20 V balances speed with low power draw
  • 2Rx8 288-pin layout fits standard DDR4 server slots
  • Major-brand Samsung SK Hynix or Micron chips meet OEM specifications

仕様

BrandDell
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset

この商品に関する質問

Does this DDR4-2133 RDIMM run at the full 2133 MT/s speed or is it capped by the platform?

The module is rated PC4-17000 at 2133 MT/s with CL15 latency. Actual operating speed depends on the server's memory controller and populated DIMM slots; the rated ceiling is 2133 MT/s.

Will this 288-pin registered DIMM fit in my Dell PowerEdge server's memory slots?

Yes. It uses the standard 288-pin DDR4 RDIMM form factor with 2Rx8 organisation and 1.20 V operation, matching the mechanical and electrical slot requirements for compatible Dell platforms.

What is the correct installation order for these 2Rx8 registered modules?

Populate slots according to the server's memory-configuration guide — typically one DIMM per channel first, respecting rank limits per channel. A common error is mixing registered and unbuffered DIMMs or exceeding the maximum ranks per channel.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。