暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 server memory module with black chips

Brute Networks

Brute Networks P13208?001 HPE 8GB DDR4-2933 1Rx8 Registered ECC server RAM

SKU CH-WG3K-QAEWW

8GB DDR4-2933 registered ECC server module with 1Rx8 organisation and 1.2V operation

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity supports larger workloads
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Registered ECC design protects data integrity
  • 20V operation reduces power draw
  • 100% HPE compatible with lifetime warranty

8 GB DDR4-2933 registered ECC module

This 8 GB DDR4-2933 registered ECC module is built for servers that require error-correcting memory. It operates at 1.20 V and uses a 288-pin form factor with a 1Rx8 organisation.

Suited for HPE platforms needing validated RDIMMs

It suits administrators expanding or repairing HPE systems that call for PC4-23400 registered DIMMs. It is not for workstations or desktops that accept only unbuffered non-ECC memory.

8 GB capacity for typical virtualisation workloads

The single rank delivers 8 GB of addressable capacity per slot, handling common virtualisation and database tasks. Workloads that demand larger per-module densities will need higher-capacity DIMMs.

特長

  • 8GB capacity supports larger workloads
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Registered ECC design protects data integrity
  • 20V operation reduces power draw
  • 100% HPE compatible with lifetime warranty

仕様

BrandHPE
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

この商品に関する質問

Does my server need a free 288-pin DDR4 slot to install this 8 GB module?

Yes, the module uses a standard 288-pin DDR4 form factor and requires an available DDR4 DIMM slot on the motherboard.

Can I mix this 2933 MHz registered ECC stick with slower DDR4 ECC modules already in my system?

The module will run at the lowest common speed and all installed DIMMs must be registered ECC; mixing ranks or speeds may limit performance.

How can I verify the module is running at DDR4-2933 with ECC active after installation?

Check the BIOS memory information or use a tool such as dmidecode to confirm 2933 MT/s, 1.20 V operation and ECC enabled status.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。