暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black chips and gold edge connectors

Brute Networks

Brute Networks P19043-K21 32GB DDR4-2933 2Rx4 1.2V 288-Pin Server RAM

SKU CH-EKAM-VKA6E

HPE-compatible 32 GB registered ECC DDR4-2933 module with 2Rx4 organisation, 1.20 V operation and 288-pin form factor

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB DDR4-2933 capacity supports heavy server workloads
  • Registered ECC design protects data integrity in critical systems
  • 2 V operation reduces power draw and heat output
  • 2Rx4 dual-rank layout maximises memory density per slot
  • 100 % HPE compatible — validated with major-brand Samsung, SK Hynix or Micron chips

32GB DDR4-2933 Registered ECC Module

This 32GB DDR4-2933 registered ECC module is built for HPE servers that require PC4-23400 speed and 1.20V operation. It targets administrators who need to expand memory capacity in supported platforms without changing the existing memory configuration.

Capacity and headroom for multi-rank workloads

The dual-rank 2Rx4 organisation delivers 32GB per 288-pin DIMM, letting a compatible server reach higher total memory with fewer slots. Registered signalling and ECC protect data integrity under sustained load, while the 2933 MT/s rate matches the platform’s rated throughput ceiling.

Drop-in replacement for HPE P19043-K21

This module replaces the HPE P19043-K21 part using the same major-brand DRAM components and validated timings. The upgrade is worth it when the server’s memory slots are free and the workload demands more than the current installed capacity allows.

特長

  • 32 GB DDR4-2933 capacity supports heavy server workloads
  • Registered ECC design protects data integrity in critical systems
  • 2 V operation reduces power draw and heat output
  • 2Rx4 dual-rank layout maximises memory density per slot
  • 100 % HPE compatible — validated with major-brand Samsung, SK Hynix or Micron chips

仕様

BrandHPE
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

この商品に関する質問

Will this 32 GB DDR4-2933 registered ECC module run alongside existing DDR4 memory in my HPE server?

The module is 100% HPE compatible and validated for use in HPE servers. Brute Networks fills orders with identically matching modules to avoid mismatched memory configurations.

How can I verify the module is operating at DDR4-2933 with ECC active after installation?

Check the server BIOS or system management utility; it will report the memory speed as 2933 MT/s, registered ECC, 1.20 V and 2Rx4 organisation.

What comes in the box and is anything else required for installation?

The box contains the 32 GB 288-pin DDR4 RDIMM. No extra components are needed; the module installs directly into a compatible DDR4 DIMM slot.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。