Brute Networks
Brute Networks P19045-K21 64GB DDR4-2933 2Rx4 Registered ECC server RAM
64 GB registered ECC DDR4-2933 server memory module with 2Rx4 organisation and 1.2 V operation
- Capacity64GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2933 (PC4 23400)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 64GB capacity supports memory-intensive server workloads
- DDR4-2933 speed delivers 23400 MT/s data rate
- Registered ECC design corrects errors for data integrity
- 2Rx4 organisation increases density per 288-pin module
- 2V operation reduces power draw per DIMM
HPE Compatible 64GB DDR4-2933 Registered ECC
This module delivers 64GB of DDR4-2933 registered ECC memory in a 288-pin form factor. It operates at 1.20V with a 2Rx4 rank configuration using major brand chipsets. The part matches HPE part number P19045-K21 and is validated for 100 percent compatibility with supported HPE servers.
Suited for HPE server upgrades needing registered
IT teams expanding memory in compatible HPE platforms will find this module fits the required specification. Builders working on non-HPE systems or consumer desktop boards should look elsewhere because the registered buffer and ECC function require server-class chipset support.
Identically matched modules simplify deployment
Every order ships with matching modules from the same major manufacturer, removing the risk of mixed ranks or timing mismatches. The lifetime warranty covers the hardware for the usable life of the server, and the validated compatibility protects the original factory warranty on the host system.
特長
- 64GB capacity supports memory-intensive server workloads
- DDR4-2933 speed delivers 23400 MT/s data rate
- Registered ECC design corrects errors for data integrity
- 2Rx4 organisation increases density per 288-pin module
- 2V operation reduces power draw per DIMM
仕様
| Brand | HPE |
|---|---|
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
この商品に関する質問
What server platform must I already own for this HPE-compatible 288-Pin DDR4-2933 registered ECC module to function?
You need an HPE server that accepts 288-pin DDR4-2933 registered ECC DIMMs running at 1.20 V; the module is validated as 100% compatible with the P19045-K21 part number.
How will this 64 GB 2Rx4 DDR4-2933 stick behave if I keep slower DDR4 DIMMs already installed in the same server?
The memory controller will down-clock all modules to the lowest common speed and voltage, so the new 2933 MT/s stick will run at the slower DIMMs' rate while maintaining registered ECC operation.
How can I confirm the module is operating at its rated DDR4-2933 speed and registered ECC mode after installation?
Check the server BIOS or iLO interface; it should report each DIMM at 2933 MT/s, 1.20 V, registered and ECC enabled with the correct 64 GB capacity per module.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。



