暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White vertical GPU bracket with 200mm PCIe 5.0 riser cable, alloy steel, two-slot design

BUCIER

BUCIER 2-Slot GPU Vertical Mount Bracket 200mm PCIe 5.0 Riser Cable White

SKU CH-A47R-2PGZN

A white alloy-steel bracket holds a two-slot graphics card vertically with a 200mm PCIe 5.0 riser cable rated for 64GB/s theoretical bandwidth

  • ColorWhite
  • MaterialAlloy Steel
  • Features200mm
  • Unit Dimension19.0 in x 16.0 in x 2.7 in
  • Unit Weight0.608 kilograms
  • Shipping Dimension13.6906 in x 14.097 in x 20.701 in
  • Vertical GPU mount improves airflow with 200mm PCIe 5.0 riser cable
  • PCIe 5.0 bandwidth up to 64GB/s theoretical speed with compatible CPU and GPU
  • One-piece alloy steel bracket supports heavy graphics cards securely
  • Three foam pads included to reduce vibration and add stability
  • White finish matches white-themed PC builds for a clean look

Vertical GPU Mount Kit

The BUCIER bracket and 200mm PCIe 5.0 riser cable let builders install a two-slot graphics card vertically in cases with seven or eight open expansion slots. The one-piece alloy-steel plate supports heavy cards while three foam pads add stability and reduce vibration. A white finish matches light-themed builds.

Suited For And Limits

This kit suits enthusiasts who want to showcase a compatible GPU vertically and have a case with fully open PCIe slot spacing. Builders whose cases use slotted railings between expansion slots cannot use the bracket. Systems running CPUs older than Intel 13th Gen or Ryzen 8700 will not reach the PCIe 5.0 link speed.

Bandwidth And Headroom

The riser cable is rated for PCIe 5.0 with a theoretical 64GB/s ceiling and tested throughput around 50GB/s. That bandwidth is only realised with RTX 50 series or Radeon RX 9000 series GPUs on qualifying platforms. Older graphics cards will operate at their native link speeds instead.

特長

  • Vertical GPU mount improves airflow with 200mm PCIe 5.0 riser cable
  • PCIe 5.0 bandwidth up to 64GB/s theoretical speed with compatible CPU and GPU
  • One-piece alloy steel bracket supports heavy graphics cards securely
  • Three foam pads included to reduce vibration and add stability
  • White finish matches white-themed PC builds for a clean look

仕様

BrandBUCIER
Part Number1
ColorWhite
MaterialAlloy Steel
Features200mm
Unit Dimension19.0 in x 16.0 in x 2.7 in
Unit Weight0.608 kilograms
Shipping Dimension13.6906 in x 14.097 in x 20.701 in
Shipping Weight0.608 kilograms

この商品に関する質問

What CPU generation is needed to reach the stated PCIe 5.0 bandwidth with this riser?

An Intel 13th Gen or Ryzen 8700 processor or newer is required for the theoretical 64 GB/s and tested ~50 GB/s speeds.

Will this bracket fit a case that only has six open PCI slots?

No, the bracket requires a PC case with seven or eight open PCIe slots and no railings between them for full clearance.

How can I verify the riser is delivering PCIe 5.0 performance after installation?

Pair it with an RTX 5090 or Radeon RX 9000 series GPU on a compatible CPU and confirm link width and speed in GPU-Z or a similar tool.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。