暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver brass G 1/4in male/female extension coupler 10mm height with diamond knurling

Bykski

Bykski G 1/4in Male/Female Extension Coupler 10mm

SKU CH-JB1R-3C0Z0

A G 1/4in brass extension coupler adds 10mm clearance for custom liquid-cooling loops

  • TypeCPU Block
  • ColorSilver
  • Extends fittings by 10mm for extra clearance
  • G 1/4in male and female threads fit standard water-cooling loops
  • Diamond-knurled brass body gives secure tool-free grip
  • 15mm overall height with threads for tight spacing
  • Brass construction resists corrosion in non-aluminium loops

Extension Coupler for Custom Loops

The Bykski G 1/4in Male/Female Extension Coupler adds 10mm of spacing between G 1/4in threaded fittings. It suits builders who need extra clearance when routing tubing in a custom liquid-cooling loop. The brass body features diamond knurling for grip during assembly. This part is intended for non-aluminum loops only.

Solving Clearance Gaps

The coupler replaces a direct fitting-to-fitting connection when components sit too close together. It is worth adding when a reservoir, block or radiator port needs a short standoff to avoid interference. The 15mm overall height with threads provides the extension without a long rigid tube run. It does not suit loops that require aluminium-compatible components.

Installation Notes

Thread the male end into the component port and the female end accepts the existing fitting. Hand-tighten the knurled brass body; over-tightening can damage threads or the internal finish. The supplier warns that the internal finish may react with DI water coolants and is not compatible with PrimoChill Opaque or VUE coolant series. Use at your own risk.

特長

  • Extends fittings by 10mm for extra clearance
  • G 1/4in male and female threads fit standard water-cooling loops
  • Diamond-knurled brass body gives secure tool-free grip
  • 15mm overall height with threads for tight spacing
  • Brass construction resists corrosion in non-aluminium loops

仕様

TypeCPU Block
ColorSilver

この商品に関する質問

How much clearance does the 10mm extension coupler add between G 1/4in fittings?

The coupler adds 10mm of height without threads and 15mm including the threaded portion, giving extra space for routing or clearance issues.

What is the correct way to tighten the brass coupler so the diamond knurling grips without stripping the G 1/4in threads?

Hand-tighten the knurled body until the O-ring seats, then give a slight quarter-turn with fingers only — over-tightening with tools can deform the brass threads.

When should the coupler be replaced if the loop uses coolants other than DI water or PrimoChill Opaque and VUE series?

Inspect the internal finish annually; replace the coupler if discoloration, plating wear or coolant residue appears inside the thread channel.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。