暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green Cat6a snagless UTP patch cable with RJ45 connectors, three feet long

Cables To Go

Cables To Go 50781 Cat6a Snagless UTP Network Ethernet Cable 3 ft Green

SKU CH-0K38-KBNET MPN 50781

A 3 ft green Cat6a patch cable with snagless RJ-45 connectors for 10 Gigabit Ethernet links up to 100 metres

  • TypeNetwork Ethernet Cable
  • Cat6A
  • Connector A1 x RJ-45 Male
  • Connector B1 x RJ-45 Male
  • Length3 ft.
  • ColorGreen
  • Supports 10 Gigabit data rates with Cat6a performance
  • Tested to ANSI/TIA 568 C.2 Cat6a channel requirements
  • Snagless hood protects connectors in high-density switch installations
  • Green colour enables easy network colour-coding
  • 3 ft length suits short patch panel or desk connections

Three-foot Cat6a patch cable for 10 Gigabit links

This three-foot Cat6a patch cable is built for 10 Gigabit Ethernet over copper. It uses unshielded twisted-pair construction with RJ-45 male connectors on both ends and a snagless hood that protects the latch in dense switch ports. The green jacket helps colour-code the run.

Check port speed and cabling standard before

Verify that the connected equipment presents 10GBase-T ports and that the overall channel meets ANSI/TIA 568 C.2 Cat6a requirements. The link is rated to 100 metres, so ensure the total path length stays within that limit. Confirm the switch or router density allows the snagless boot to seat fully.

Suits installers needing a short.

Ideal for patch-panel to switch links, desk-side connections or any 10 Gigabit segment where a three-foot green cable simplifies identification. Not suited for runs that exceed the channel distance, for shielded environments requiring foil or braid, or for installations that demand a different colour-coding scheme.

特長

  • Supports 10 Gigabit data rates with Cat6a performance
  • Tested to ANSI/TIA 568 C.2 Cat6a channel requirements
  • Snagless hood protects connectors in high-density switch installations
  • Green colour enables easy network colour-coding
  • 3 ft length suits short patch panel or desk connections

仕様

BrandC2G
Model50781
TypeNetwork Ethernet Cable
Cat6A
Connector A1 x RJ-45 Male
Connector B1 x RJ-45 Male
Length3 ft.
ColorGreen
ShieldedUnshielded
FeaturesThis Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements.
Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is
配送重量0.07 kg
梱包サイズ127 × 127 × 13 mm

この商品に関する質問

Does the 50781 cable come with any extra connectors or do I need to buy RJ-45 plugs separately?

The cable has an RJ-45 male plug on each end, so no additional connectors are required.

Which Cat6a length should I choose if my switch and patch panel are three feet apart?

The 3 ft model matches that distance exactly and keeps slack to a minimum.

What does the 10 Gigabit rating mean when I plug this cable into a 10GBase-T switch?

It supports 10 Gigabit data transmission over the full 100 meter channel when installed to ANSI/TIA 568 C.2 Cat6a requirements.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。