EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Compucase
An ATX12V power supply delivering 485 W across 3.3 V, 5 V, 12 V and 5 V standby rails with dual 8 cm cooling fans
The Compucase HEC-K10TG is an ATX12V power supply rated at 485 W maximum output. It operates on 100 to 240 V input at 50 or 60 Hz and includes a power cord for immediate installation. The unit uses dual 8 cm fans to move air through the chassis.
This supply fits older or entry-level systems that draw modest power from the +12 V rails. The two +12 V rails provide 15 A and 12 A respectively, so the combined +12 V capacity is limited. Builders planning modern discrete graphics cards or multi-rail heavy configurations should look elsewhere because the +12 V current cannot support those loads.
The defining specification is the split +12 V design: +12V1 at 15 A and +12V2 at 12 A. Minor rails are +3.3 V at 16 A, +5 V at 25 A and +5 V standby at 2 A. Checking the graphics card or motherboard manual against these per-rail limits determines whether this unit is the right part.
この商品の仕様はまだ公開されていません。
The unit uses two 8 cm fans for cooling; they are the only moving parts and will eventually wear out, so plan to replace them if noise or airflow drops.
The +12 V rails are rated at 15 A and 10 A respectively, so the second +12 V rail reaches its 10 A ceiling before the +5 V or +3.3 V rails.
With dual 8 cm fans and a 485 W maximum rating, sustained loads will push the fans to higher speeds, increasing both airflow noise and case exhaust temperature.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?