SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00501587BTC
在庫あり
Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1333 ECC Unregistered DIMM - C66
16 GB (2 × 8 GB) DDR3 1333 ECC unregistered DIMM kit validated for IBM System x3250 M4 2583‑xxx servers
- Capacity16GB (2 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- ECC error correction protects server data integrity
- 16 GB dual-channel kit boosts System x3250 M4 throughput
- 1333 MHz DDR3 matches factory memory speed
- Unregistered 240-pin DIMMs install in all four slots
- Major-brand chips validated for IBM 2583 series
Server-specific DDR3 ECC kit
This 16 GB kit contains two 8 GB DDR3-1333 ECC unregistered DIMMs built for the IBM System x3250 M4 2583-xxx series. Each module runs at 1.5 V with CL9 9-9-9 timings on a 240-pin interface. The memory is validated only for that server platform.
Straightforward DIMM installation
Power down the server, open the chassis and insert each module into the four available ECC UDIMM slots until the retention clips lock. No driver or BIOS update is required. The kit will not work in systems that demand registered or load-reduced DIMMs, nor in consumer boards that lack ECC support.
16 GB dual-channel capacity
The server supports a maximum of 32 GB across its four sockets, so this 16 GB kit fills half the capacity. Builders needing the full 32 GB limit must add a second identical kit. Workstations or PCs that cannot use ECC unregistered DDR3 cannot use these modules.
特長
- ECC error correction protects server data integrity
- 16 GB dual-channel kit boosts System x3250 M4 throughput
- 1333 MHz DDR3 matches factory memory speed
- Unregistered 240-pin DIMMs install in all four slots
- Major-brand chips validated for IBM 2583 series
仕様
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10247210600ENRDIMM1R8 |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Ibm System System X3250 M4 2583-Xxx Series |
| Package Content | 2 Memory RAM Sticks |
この商品に関する質問
How can I confirm the 1333 MHz DDR3 kit is running at the correct speed after installation?
Enter the system BIOS or UEFI and check the reported memory frequency; it should read 1333 MHz (PC3-10600) for each of the two 8 GB modules.
What exactly ships in the box and is anything else required to install it in an IBM System x3250 M4 2583-xxx?
The package contains two 240-pin DDR3 ECC unregistered DIMMs totalling 16 GB; no additional parts are needed for the supported server.
Which capacity option should I choose if the server has four ECC UDIMM sockets and a 32 GB maximum?
This 16 GB (2 x 8 GB) kit fills half the sockets and leaves room to add another identical kit later to reach the 32 GB limit.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
