暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green 240-pin DDR2 FB-DIMM modules with gold contacts

Computer Memory Solutions

Computer Memory Solutions 16GB (8x2GB) DDR2 5300 667MHz ECC Fully Buffered DIMM - B119

SKU CH-0V5G-Y4WSS

Eight 2 GB DDR2 fully buffered ECC modules at 667 MHz for Dell PowerEdge 2950 servers

  • Capacity8GB (4 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 16 GB total capacity in an 8-module kit
  • Fully buffered ECC DDR2 for Dell PowerEdge 2950 servers
  • 667 MHz DDR2-5300 speed with CL5 latency
  • 240-pin DIMM form factor at 1.8 V
  • 2Rx4 rank organisation for registered server memory

Server-grade DDR2 kit

This sixteen-gigabyte kit contains eight two-gigabyte fully buffered DIMMs built for the Dell PowerEdge 2950. Each module runs at 667 megahertz with CL5 timing and operates at 1.8 volts. Error-correcting code and registered buffering protect data integrity in continuous server workloads.

Steady throughput under load

Fully buffered architecture moves the memory controller onto the module, reducing electrical load on the motherboard during sustained read and write cycles. ECC detects and corrects single-bit errors without halting the system. The 5-5-5 timing holds stable across long database or virtualization sessions.

Thermals and power in normal use

Modules draw 1.8 volts and run without active cooling in the PowerEdge 2950 chassis airflow. Fully buffered design adds a small buffer-chip overhead but keeps per-stick power predictable. No heat spreader is guaranteed; the server’s directed airflow handles dissipation.

特長

  • 16 GB total capacity in an 8-module kit
  • Fully buffered ECC DDR2 for Dell PowerEdge 2950 servers
  • 667 MHz DDR2-5300 speed with CL5 latency
  • 240-pin DIMM form factor at 1.8 V
  • 2Rx4 rank organisation for registered server memory

仕様

BrandComputer Memory Solutions
ModelCM256725300FBDIMM2R4
Capacity8GB (4 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredFully Buffered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemDell Poweredge 2950
Package Content2 Memory RAM Sticks

この商品に関する質問

How much heat or noise should I expect from the 1.8 V DDR2-667 fully-buffered modules running 24/7 in a PowerEdge 2950?

These DDR2-667 FB-DIMMs operate at the standard 1.8 V server voltage and generate no more heat than the original Dell-qualified memory; they add no moving parts, so acoustic output is unchanged.

What must already be installed in my Dell PowerEdge 2950 for this 16 GB (8 × 2 GB) ECC FB-DIMM kit to function?

The server needs a DDR2 FB-DIMM capable motherboard with all eight 240-pin sockets free or populated in matched pairs, a BIOS that supports fully-buffered ECC modules, and adequate airflow through the existing chassis fans.

Can I mix these CL5 667 MHz fully-buffered ECC sticks with the original Dell memory already in my 2950?

Yes — the modules match the Dell PowerEdge 2950 specification for DDR2-5300 fully-buffered ECC, so they will interleave correctly with factory-installed kits of the same speed and rank configuration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。