暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Computer Memory Solutions

Computer Memory Solutions 1GB DDR1 DIMM 400MHz 2Rx8

SKU CH-Q2ZT-K498W

Adds 1 GB of DDR1 desktop memory at 400 MHz with CL3 timing and 2.6 V operation

  • Capacity1GB
  • SpeedDDR 400 (PC 3200)
  • CAS Latency3
  • Timing3-3-3
  • Voltage2.6V
  • ECCNo
  • 1GB capacity for legacy system upgrades
  • DDR1 400MHz speed matches PC3200 standard
  • CL3 3-3-3 timing for stable operation
  • 6V unbuffered non-ECC 184-pin DIMM
  • 2Rx8 rank with major brand chipset

System-Specific DDR1 Upgrade

This 1GB DDR1 DIMM operates at 400MHz with CL3 timings and 2.6V voltage. It uses an unbuffered, non-ECC design with 2Rx8 organisation across 184 pins. The module is built with major-brand components and carries a lifetime warranty against manufacturing defects from Computer Memory Solutions.

Legacy Desktop Maintenance

Suited for technicians repairing or upgrading period-correct desktops that require DDR 400 (PC 3200) memory in a single 1GB stick. Not suited for systems needing ECC or registered modules, for builds requiring capacities beyond 1GB per slot, or for any platform that does not accept 184-pin DDR1 DIMMs.

Single-Stick Capacity Constraint

The decisive specification is the 1GB capacity on a single 184-pin unbuffered DIMM. If the target machine only supports smaller modules per slot or demands registered memory, this part will not function.

特長

  • 1GB capacity for legacy system upgrades
  • DDR1 400MHz speed matches PC3200 standard
  • CL3 3-3-3 timing for stable operation
  • 6V unbuffered non-ECC 184-pin DIMM
  • 2Rx8 rank with major brand chipset

仕様

Part NumberCM128643200DIMM
Capacity1GB
SpeedDDR 400 (PC 3200)
CAS Latency3
Timing3-3-3
Voltage2.6V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset

この商品に関する質問

Will the 184-pin DIMM fit my DDR1 motherboard slot?

Yes, this module uses the standard 184-pin DDR1 DIMM form factor designed for compatible desktop motherboard slots.

What voltage setting is required in BIOS when installing this 2.6V module?

Ensure the motherboard BIOS sets the memory voltage to 2.6V; incorrect voltage is a common cause of boot failure with DDR1 modules.

Does the 2Rx8 rank configuration affect future upgrades if I add another stick?

Mixing ranks can work but all memory will run at the slowest module's speed; matched pairs are recommended for best performance.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。