SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00501587BTC
在庫あり
Computer Memory Solutions
Computer Memory Solutions 2x32GB DDR5-5600 CL36 1.1V 288-pin DIMM kit
A 64 GB dual-channel kit of 32 GB DDR5-5600 modules with CL36 timing at 1.1 V
- Capacity32GB
- SpeedDDR5 5600 (PC5 44800)
- CAS Latency36
- Timing30-36-36-76
- Voltage1.1V
- ECCNo
- 64 GB total capacity in a matched 2 × 32 GB kit
- DDR5-5600 speed rated at PC5-44800 for high throughput
- CL36 latency with 30-36-36-76 timings tuned for responsiveness
- Low 1.1 V operation reduces power draw and heat
- Unbuffered non-ECC 288-pin DIMMs built with major-brand chipset
Capacity and speed
This kit provides two 32 GB DDR5 modules rated at 5600 MT/s with timings of 30-36-36-76 and a CAS latency of 36. They operate at 1.1 V and use a 288-pin unbuffered DIMM form factor with a 2Rx8 rank configuration and non-ECC operation.
Who this suits
Builders expanding a compatible DDR5 platform to 64 GB total capacity in matched pairs will gain bandwidth for multitasking and content workloads. Systems that require ECC, registered modules or a different pin count cannot use this kit.
Deciding specification
The 2Rx8 rank layout combined with 5600 MT/s speed at 1.1 V determines whether the memory controller can train the modules at the rated frequency without manual timing adjustments.
特長
- 64 GB total capacity in a matched 2 × 32 GB kit
- DDR5-5600 speed rated at PC5-44800 for high throughput
- CL36 latency with 30-36-36-76 timings tuned for responsiveness
- Low 1.1 V operation reduces power draw and heat
- Unbuffered non-ECC 288-pin DIMMs built with major-brand chipset
仕様
| Part Number | CM40966444800DIMM |
|---|---|
| Capacity | 32GB |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 36 |
| Timing | 30-36-36-76 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
この商品に関する質問
Will the 288-pin DDR5 DIMMs fit my motherboard's memory slots?
These are standard 288-pin DDR5 DIMMs, so they install in any desktop motherboard slot wired for DDR5.
What BIOS step is often missed when installing this 5600 MHz kit?
After seating both modules, enter the BIOS and enable the XMP or EXPO profile so the kit runs at its rated 5600 MHz instead of the default speed.
When would the non-ECC unbuffered modules need to be replaced?
They would need replacement only if a later platform change requires ECC or registered memory, or if a module fails and the lifetime warranty covers the exchange.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
