SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00495018BTC
在庫あり
Computer Memory Solutions
Computer Memory Solutions 2x8GB DDR3 1600MHz CL11 1.5V 240-pin DIMM Kit
A matched 2×8 GB DDR3 kit running at 1600 MHz with CL11 latency and 1.5 V unbuffered 240-pin DIMMs
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- CAS Latency11
- Timing11-11-11
- Voltage1.5V
- ECCNo
- 16 GB total capacity in a matched 2-piece kit
- 1600 MHz DDR3 speed rated at PC3-12800
- Low 1.5 V operation reduces power draw
- CL11 11-11-11 timings for responsive access
- 240-pin unbuffered non-ECC DIMM fits standard desktop slots
16 GB DDR3 Kit
This kit provides two 8 GB DDR3 modules rated at 1600 MHz with CL11 timing and 1.5 V operation. The 240-pin unbuffered DIMMs are built for desktop systems that require PC3-12800 non-ECC memory. Matching parts help the platform run in dual-channel mode for full bandwidth.
Suitable for DDR3 Upgrades
The kit suits owners of older desktops or workstations that specify DDR3 1600 non-ECC memory in a 240-pin form factor. Systems that require registered or ECC modules, or platforms limited to lower DDR3 speeds, should select different memory.
1600 MHz Speed Rating
The decisive specification is the 1600 MHz (PC3-12800) data rate; the motherboard and CPU must support this speed for the modules to operate at their rated frequency. If the platform caps memory at a lower DDR3 speed, the kit will downclock accordingly.
特長
- 16 GB total capacity in a matched 2-piece kit
- 1600 MHz DDR3 speed rated at PC3-12800
- Low 1.5 V operation reduces power draw
- CL11 11-11-11 timings for responsive access
- 240-pin unbuffered non-ECC DIMM fits standard desktop slots
仕様
| Part Number | CM10246412800DIMM |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | 11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
この商品に関する質問
How do I install the 240-pin DIMMs and what step is often missed?
Align the notch on each module with the slot key, press down firmly until both retention clips click shut, then verify the OS reports the full 16 GB; the step most often missed is seating both ends evenly so the clips engage automatically.
What maintenance or replacement will the 2Rx8 DDR3 kit need later?
No scheduled maintenance is required; keep the gold contacts clean and dust the slots with compressed air if the system is opened, and replace only if a module fails the lifetime warranty check.
What limit appears first when the CL11 1.5 V modules run under sustained load?
The DDR3 1600 MT/s data rate and CL11 latency set the throughput ceiling; under continuous heavy use the memory controller hits that bandwidth limit before voltage or thermal constraints become an issue.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
