SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00501016BTC
在庫あり
Computer Memory Solutions
Computer Memory Solutions 4×8GB DDR3 ECC Non-Registered 1600MHz CL11 2Rx8 1.5V 240-pin memory upgrade
A 32 GB kit of four 8 GB DDR3 ECC unregistered DIMMs running at 1600 MHz with CL11 timing at 1.5 V
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- CAS Latency11
- Timing11-11-11
- Voltage1.5V
- ECCYes
- 32 GB total capacity from four matched 8 GB modules
- ECC error correction protects data integrity in critical workloads
- DDR3 1600 MHz speed with CL11 latency for responsive performance
- Unregistered 240-pin DIMM design fits compatible desktop and workstation boards
- 5 V operation balances power draw and stability
32GB DDR3 ECC kit for servers and workstations
This 32GB kit provides four 8GB DDR3 ECC unregistered DIMMs running at 1600MHz with CL11 timings. It targets administrators upgrading compatible servers or workstations that require error-correcting memory without registered buffering. The 1.5V modules use 240-pin connectors and 2Rx8 organisation.
Capacity headroom at 32GB total across four slots
The 32GB aggregate suits virtualisation hosts, database nodes or compute nodes needing ECC integrity at moderate density. Four modules fill a typical quad-channel bank, leaving no spare slots on many platforms; expansion beyond 32GB would require higher-density DIMMs not included here.
Unregistered ECC at DDR3-1600 decides fit
The combination of ECC with unregistered signalling at 1600MHz CL11 is the decisive specification; registered or load-reduced platforms cannot use these modules, and non-ECC consumer boards will ignore the error-correction capability.
特長
- 32 GB total capacity from four matched 8 GB modules
- ECC error correction protects data integrity in critical workloads
- DDR3 1600 MHz speed with CL11 latency for responsive performance
- Unregistered 240-pin DIMM design fits compatible desktop and workstation boards
- 5 V operation balances power draw and stability
仕様
| Part Number | CM10247212800ECCNRDIMM2R8 |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | 11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
この商品に関する質問
How will the 1600 MHz DDR3 modules behave if I keep slower DDR3 sticks installed?
All memory in the system will run at the slowest performance of the installed modules or the CPU capability, so adding slower DDR3 sticks will reduce the speed of these 1600 MHz modules.
What should I check in the BIOS to confirm the 32 GB kit is running at 1600 MHz with CL11 timings?
Enter the BIOS after installation and verify the memory frequency reads 1600 MHz and the CAS latency shows 11-11-11, which matches the rated speed and timing of this kit.
Does the 4-piece kit include only the four 8 GB 240-pin DIMMs, or are any cables or tools supplied?
The kit contains four 8 GB DDR3 ECC non-registered 240-pin DIMMs; no cables, tools or additional accessories are included.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
