暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3 DIMM modules without heat spreaders

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1333 CL9 1.5V 240-pin memory upgrade

SKU CH-5451-F1HWF

8GB dual-channel DDR3 kit rated at 1333 MHz CL9 for compatible HP Pavilion Elite desktops

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 8 GB kit adds capacity for everyday multitasking
  • Dual 4 GB modules install in matched pairs
  • DDR3 1333 speed matches system specifications
  • 5 V standard voltage fits original design
  • Validated for HP Pavilion Elite E9240F E9270F E9280T E9290F

HP Pavilion Elite E9240F, E9270F, E9280T.

This 8GB kit contains two 4GB DDR3 1333 CL9 modules built for the listed HP Pavilion Elite desktops. It uses standard 240-pin unbuffered DIMMs running at 1.5V. The kit is suited for owners of those specific models who want a straightforward capacity increase without configuration hassle.

8GB total in a two-slot kit

Each module is a 4GB 2Rx8 stick rated for PC3-10600 speed and 9-9-9 timing. The pair delivers 8GB of non-ECC memory. Compatible systems accept up to four modules, so maximum capacity reaches 16GB on the E9280T and E9290F or 24GB on the E9240F and E9270F. This kit fills two of the available slots.

Replaces or adds to factory-installed modules

The upgrade works when the original memory is removed or when free slots remain. It is not for systems that require registered or ECC DIMMs, nor for boards limited to lower densities per slot. Buyers needing more than the supported maximum per model should look elsewhere.

特長

  • 8 GB kit adds capacity for everyday multitasking
  • Dual 4 GB modules install in matched pairs
  • DDR3 1333 speed matches system specifications
  • 5 V standard voltage fits original design
  • Validated for HP Pavilion Elite E9240F E9270F E9280T E9290F

仕様

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Pavilion Elite E9240F, E9270F, E9280T, E9290F
Package Content2 Memory RAM Sticks

この商品に関する質問

Will this 1333 MHz DDR3 kit work alongside the original memory in my HP Pavilion Elite e9240f?

The kit is validated for the e9240f, e9270f, e9280t and e9290f platforms. The system supports up to 16 GB across four sockets, so adding these two 4 GB modules to the existing DIMMs will fill the board to its rated maximum.

How can I confirm the CL9 1.5 V modules are running at the correct speed after installation?

Open Task Manager or CPU-Z in Windows and check the memory tab; it should show 1333 MHz (PC3-10600) with 9-9-9 timings. The BIOS POST screen also reports the detected frequency and latency before the OS loads.

What exactly ships in the box and is anything else required to complete the upgrade?

The package contains two 4 GB 240-pin DDR3 DIMMs — no heat spreaders, no cables, no tools. The e9240f chassis uses tool-less DIMM clips, so you only need the modules themselves to finish the upgrade.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。