暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR2 memory modules with gold contacts

Computer Memory Solutions

Computer Memory Solutions 8GB (4x2GB) DDR2 667 Fully Buffered ECC Server Memory Upgrade

SKU CH-ZF57-JRBYP

Four 2 GB fully-buffered DDR2 ECC DIMMs for Supermicro X7DVL server boards

  • Capacity8GB (4 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 8GB total capacity for demanding server workloads
  • Fully Buffered ECC design protects data integrity
  • DDR2 667 speed matches Supermicro X7DVL specifications
  • 240-pin DIMM form factor fits motherboard slots
  • 4-piece kit enables multi-channel memory configuration

Server-Specific DDR2 Kit

This 8GB kit contains four 2GB fully buffered ECC DIMMs built for Supermicro X7DVL-3, X7DVL-E and X7DVL-I motherboards. It targets administrators upgrading legacy dual-socket servers that require registered DDR2 memory. The modules operate at 1.8V with a CL5 5-5-5 timing profile.

Capacity and Headroom

The kit delivers 8GB across four slots, leaving headroom toward the platform maximum of 16GB across six sockets. It comfortably handles typical server workloads such as virtualization hosts or database caches within that limit. Larger datasets or heavier consolidation will exhaust the available capacity before the board reaches its physical ceiling.

DDR2 667 Interface Limits

The DDR2 667 (PC2-5300) interface caps bandwidth at the rated speed, so memory-intensive tasks cannot exceed that throughput. Fully buffered signalling adds latency overhead compared with unbuffered designs. The platform requires a 64-bit operating system to address the full 16GB maximum.

特長

  • 8GB total capacity for demanding server workloads
  • Fully Buffered ECC design protects data integrity
  • DDR2 667 speed matches Supermicro X7DVL specifications
  • 240-pin DIMM form factor fits motherboard slots
  • 4-piece kit enables multi-channel memory configuration

仕様

BrandComputer Memory Solutions
ModelCM256725300FBDIMM2R4
Capacity8GB (4 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredFully Buffered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro X7Dvl-3, X7Dvl-E, X7Dvl-I Motherboard
Package Content2 Memory RAM Sticks

この商品に関する質問

Will this DDR2 667 kit work with the other memory slots on my Supermicro X7DVL-3 motherboard?

The Supermicro X7DVL-3 board has 6 sockets and a maximum capacity of 16 GB. This 8 GB kit fills four of the six slots, leaving two free for future expansion.

How can I confirm the 240-pin fully buffered ECC modules are running at the correct 667 MHz speed after installation?

Enter the system BIOS or use a hardware information tool to verify the memory is detected as DDR2 667 (PC2 5300) with CL5 timings and ECC active.

The listing mentions a 4-piece kit but the package content states 2 memory RAM sticks — what exactly is included?

The kit contains four 2 GB fully buffered ECC DIMMs totalling 8 GB; the package content summary appears to be a typo.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。