暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Computer Memory Solutions

Computer Memory Solutions 8GB DDR3 12800 1600MHz NON ECC SODIMM Synology DiskStation DS218+ memory upgrade

SKU CH-65DD-BZG25

8GB DDR3L 1600 MHz SODIMM upgrades Synology DS218+ to 16GB total capacity

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.35V
  • 8 GB capacity expands DS218+ memory to 16 GB total
  • 35 V DDR3L reduces power draw and heat output
  • CL11 1600 MHz timing delivers responsive NAS performance
  • 204-pin SO-DIMM form factor fits DS218+ slots directly
  • Unbuffered non-ECC design matches Synology memory requirements

Synology DS218+ memory upgrade

This 8GB DDR3L SODIMM module is built specifically for the Synology DiskStation DS218+. It runs at 1600MHz with CL11 timing and operates at a low 1.35V voltage. The unbuffered, non-ECC design matches the NAS requirements exactly. One stick is included in the package.

Suitable for DS218+ owners needing more RAM

This upgrade suits users who want to increase the memory in a compatible DiskStation. It will not fit systems that require standard DDR3 at 1.5V or modules with ECC functionality. Buyers with a different NAS model or a desktop motherboard should verify their platform specifications before purchasing.

The deciding specification is DDR3L 1.35V

The module uses DDR3L technology at 1.35V rather than standard DDR3 at 1.5V. If the target system does not support low-voltage DDR3L operation, the memory will not function correctly. Confirm that the DS218+ or your specific device accepts 1.35V SO-DIMMs before ordering.

特長

  • 8 GB capacity expands DS218+ memory to 16 GB total
  • 35 V DDR3L reduces power draw and heat output
  • CL11 1600 MHz timing delivers responsive NAS performance
  • 204-pin SO-DIMM form factor fits DS218+ slots directly
  • Unbuffered non-ECC design matches Synology memory requirements

仕様

BrandComputer Memory Solutions
ModelCM10246412800SODRL
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSynology DiskStation DS218+
Package Content1Memory Ram Stick

この商品に関する質問

Does the Synology DiskStation DS218+ need any specific slot configuration to accept this 204-Pin DDR3L SO-DIMM?

The DS218+ has two memory sockets supporting up to 16 GB total; this single 8 GB module occupies one slot and works without any special configuration.

Will this 1.35 V DDR3L 1600 MHz module run stably alongside an existing 1.5 V DDR3 stick in the second slot?

The DS218+ memory controller negotiates a common voltage and timing; the 1.35 V module will operate at the lower voltage with CL11 11-11-11 timings when paired with a 1.5 V stick.

How can I confirm the DS218+ recognises the full 8 GB capacity after installing this CM10246412800SODRL module?

Open DSM Control Panel → Info Center; the System tab should display 8 GB (or 16 GB if both slots are filled) under Memory.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。