暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, no heat spreader, 240-pin DDR3 DIMM

Computer Memory Solutions

Computer Memory Solutions 8GB DDR3 1600MHz CL11 240-pin DIMM for HP Pro 6305

SKU CH-MKQ7-R9YMS

8GB DDR3 1600MHz CL11 240-pin DIMM module validated for HP Pro 6305 systems

  • Capacity8GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 8 GB capacity expands HP Pro 6305 memory up to 32 GB maximum
  • DDR3 1600 MHz CL11 timing delivers responsive system performance
  • Non-ECC unbuffered 240-pin DIMM fits HP Pro 6305 MT/SFF slots
  • 5 V operation matches factory voltage for stable compatibility
  • Guaranteed compatible with listed HP Pro 6305 part numbers

System-Specific DDR3 Upgrade

This 8GB DDR3 module is built for HP Pro 6305 MT and SFF desktops. It installs directly into the 240-pin DIMM slots without configuration changes. The stick suits offices and home labs that need more memory for everyday multitasking on these legacy platforms.

Thermals Noise and Power Draw

Running at 1.5 volts with no heat spreader, the module draws minimal power and produces no audible noise. Passive cooling from case airflow is sufficient for normal workloads. The unbuffered, non-ECC design keeps latency low at CL11 11-11-11 timing.

Upgrade Path and Value

The Pro 6305 supports up to 32GB across four slots, so this 8GB stick can be added alongside existing modules. A 64-bit operating system is required to address the full capacity. Buyers needing ECC error correction or speeds beyond DDR3 1600 should look elsewhere.

特長

  • 8 GB capacity expands HP Pro 6305 memory up to 32 GB maximum
  • DDR3 1600 MHz CL11 timing delivers responsive system performance
  • Non-ECC unbuffered 240-pin DIMM fits HP Pro 6305 MT/SFF slots
  • 5 V operation matches factory voltage for stable compatibility
  • Guaranteed compatible with listed HP Pro 6305 part numbers

仕様

BrandComputer Memory Solutions
ModelCM10246412800DIMM
Capacity8GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Pro 6305 Mt/Sff
Package Content1 Memory RAM Stick

この商品に関する質問

How do I install this 240-pin DDR3 DIMM in the HP Pro 6305, and what step is often missed?

Power off and unplug the system, open the chassis, align the notch on the module with the slot key, press firmly until both side clips click shut, then verify 8 GB is recognised in BIOS — the step often missed is seating the module fully so both clips engage.

What maintenance or replacement will this 8 GB DDR3 1600 MHz CL11 module need later?

No scheduled maintenance is required; keep the interior dust-free and ensure the 1.5 V power supply remains stable — replacement is only needed if a memory test reports errors or you expand beyond the 32 GB maximum supported by the Pro 6305.

What limit appears first when this memory runs sustained workloads on the Pro 6305?

The platform caps at 32 GB total across four sockets and requires a 64-bit OS to address the full 8 GB per module; with four sockets filled, 32 GB is the hard ceiling before any thermal or timing limit is reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。