暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 DIMM sticks, 288-pin, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM1024642400DIMM 16GB (2x8GB) DDR4 2400 memory upgrade

SKU CH-QP6Z-ZA4X5

A 16 GB DDR4 kit of two 8 GB modules at 2400 MHz, CL17, 1.2 V, built for Dell OptiPlex 7050 SFF or Tower systems

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • Dual-channel 16 GB kit boosts multitasking on OptiPlex 7050
  • DDR4 2400 MHz speed matches system spec for stable performance
  • CL17 latency and 1.2 V voltage reduce power draw
  • Two unbuffered 288-pin DIMMs install directly into four available slots
  • Lifetime warranty from Computer Memory Solutions backs every module

16 GB DDR4 kit for Dell OptiPlex 7050

This 16 GB kit contains two 8 GB DDR4 2400 modules built for the Dell OptiPlex 7050 SFF and Tower. It targets owners of those systems who want a straightforward memory upgrade without compatibility guesswork. The non-ECC unbuffered DIMMs match the factory memory type used in these desktops.

2400 MHz CL17 speed rating

The modules run at DDR4 2400 (PC4 19200) with CAS latency 17 and 17-17-17 timings at 1.2 V. This exact speed grade is what the OptiPlex 7050 platform expects; faster or slower kits may not post or will downclock. Buyers who need ECC or registered memory cannot use this kit.

Simple two-slot installation

Installation means opening the chassis, seating both 288-pin DIMMs in the correct slots and closing the case. The system supports up to 64 GB across four sockets, so this pair leaves room for later expansion. No heat spreaders are fitted, so clearance is rarely an issue in the small form factor chassis.

特長

  • Dual-channel 16 GB kit boosts multitasking on OptiPlex 7050
  • DDR4 2400 MHz speed matches system spec for stable performance
  • CL17 latency and 1.2 V voltage reduce power draw
  • Two unbuffered 288-pin DIMMs install directly into four available slots
  • Lifetime warranty from Computer Memory Solutions backs every module

仕様

BrandComputer Memory Solutions
ModelCM1024642400DIMM
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell OptiPlex 7050 SFF / Tower
Package Content2 Memory RAM Sticks

この商品に関する質問

What does the 2400 MHz speed mean for my Dell OptiPlex 7050?

The kit runs at DDR4 2400 (PC4 19200), matching the OptiPlex 7050's supported memory speed so the system can operate at its rated bandwidth.

Will the 288-pin DDR4 DIMMs fit the OptiPlex 7050 SFF and Tower motherboards?

Yes, both form factors use standard 288-pin DDR4 DIMM slots and the modules are unbuffered non-ECC as required.

How much space do the two 8 GB sticks need inside the case?

Each module is a standard-height 288-pin DIMM without a heat spreader, so they fit the four DIMM slots in either the SFF or Tower chassis.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。