暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR4 memory sticks with gold contacts and black chips, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM1024722133ECCREG1R4 32GB (4x8GB) DDR4 2133 ECC Registered DIMM B122

SKU CH-X8K4-ASQA1

32 GB kit of four 8 GB DDR4 ECC registered DIMMs at 2133 MHz CL15 for Dell PowerEdge FC430 and Precision T5810 and T7810

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Timing15-15-15
  • Voltage1.2V
  • 32GB quad-channel kit expands Dell server capacity
  • ECC registered DIMMs protect data integrity in critical workloads
  • DDR4-2133 CL15 timing balances speed and stability
  • 2V operation reduces power draw per module
  • Validated for PowerEdge FC430 and Precision T5810/T7810 workstations

Dell PowerEdge FC430 compatible DDR4 kit

This 32GB kit contains four 8GB DDR4 registered DIMMs built for Dell PowerEdge FC430, Precision Workstation T5810 and Precision Workstation T7810 systems. Each module runs at 2133MHz with CL15 timing at 1.2V. The registered design adds signal buffering for stable operation in multi-socket servers and workstations. ECC protection corrects single-bit errors to maintain data integrity.

Upgrade from non-ECC or unbuffered memory

Systems shipping with standard unbuffered DIMMs or without error correction gain registered signalling and ECC from this kit. The jump is worth it when workloads run continuously on FC430 or T5810/T7810 platforms that require registered modules. Mixing registered with unbuffered memory is not supported, so a full replacement is necessary. The four-module pack fills one CPU socket's four DIMM slots in a single step.

32GB total capacity across four slots

The 32GB total provides headroom for virtualisation, database caching and multi-user applications on supported Dell platforms. Each CPU socket accepts up to four DIMMs, so this kit occupies all slots on a single processor. Maximum platform capacity reaches 256GB when both CPU sockets are populated with eight modules. Workloads needing more than 32GB per socket will require higher-density registered DIMMs.

特長

  • 32GB quad-channel kit expands Dell server capacity
  • ECC registered DIMMs protect data integrity in critical workloads
  • DDR4-2133 CL15 timing balances speed and stability
  • 2V operation reduces power draw per module
  • Validated for PowerEdge FC430 and Precision T5810/T7810 workstations

仕様

BrandComputer Memory Solutions
ModelCM1024722133ECCREG1R4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Timing15-15-15
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Poweredge FC430, Precision Workstation T5810, Precision Workstation T7810
Package Content4 Memory RAM Sticks

この商品に関する質問

Will these 288-pin DDR4 DIMMs fit the Dell PowerEdge FC430 and Precision T5810 or T7810 workstations?

Yes, the kit is validated for Dell PowerEdge FC430, Precision Workstation T5810 and Precision Workstation T7810 systems.

What is the correct way to install the four 8 GB registered modules in a dual-CPU T7810?

Populate the four sockets per CPU in the order shown in the system service manual; the common mistake is mixing registered and unbuffered DIMMs in the same channel.

When should the registered ECC modules be replaced in a server running continuous workloads?

Replace them if the system logs corrected ECC errors that exceed the platform threshold, or when a capacity upgrade beyond the 256 GB maximum is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。