暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Computer Memory Solutions

Computer Memory Solutions CM128643200DIMM 2GB (2x1GB) DDR400 memory upgrade

SKU CH-SCTD-NC6RT

A 2 GB DDR400 kit of two 184-pin unbuffered DIMMs validated for Dell Dimension 8300 desktops

  • Capacity2GB (2 x 1GB)
  • Type184-Pin DDR SDRAM
  • SpeedDDR 400 (PC 3200)
  • CAS LatencyCL3
  • Timing3-3-3
  • Voltage2.6V
  • 2GB kit expands Dell Dimension 8300 capacity
  • 184-pin DDR400 modules match system slot specification
  • CL3 timing supports stable 400 MHz operation
  • Non-ECC unbuffered design fits desktop memory architecture
  • Computer Memory Solutions validates compatibility for guaranteed fit

Dell Dimension 8300 memory kit

This 2 GB kit contains two 1 GB unbuffered DIMMs built to the PC3200 DDR400 standard. Computer Memory Solutions tests each module for guaranteed operation in Dell Dimension 8300 desktops. The sticks use major-brand chips and carry a limited lifetime warranty from the manufacturer. Installation simply fills two of the four available slots.

Owners of a Dimension 8300 restoring original

The kit matches the factory speed, voltage and timing for that model, so it works without BIOS changes. Buyers who need ECC error correction, registered modules, lower-voltage DDR or a different pin count cannot use this memory. Anyone upgrading a non-Dell system or a Dell model not listed should verify compatibility before purchase.

184-pin DDR400 interface decides fit

The DIMMs have 184 pins and run at 2.6 V with CL3 3-3-3 timing. Only motherboards that accept unbuffered non-ECC DDR400 DIMMs in 184-pin sockets will recognise the modules. If the target board requires a different pin layout, voltage or buffering type, this kit will not function.

特長

  • 2GB kit expands Dell Dimension 8300 capacity
  • 184-pin DDR400 modules match system slot specification
  • CL3 timing supports stable 400 MHz operation
  • Non-ECC unbuffered design fits desktop memory architecture
  • Computer Memory Solutions validates compatibility for guaranteed fit

仕様

BrandComputer Memory Solutions
ModelCM128643200DIMM
Capacity2GB (2 x 1GB)
Type184-Pin DDR SDRAM
SpeedDDR 400 (PC 3200)
CAS LatencyCL3
Timing3-3-3
Voltage2.6V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Dimension 8300 desktops
Package Content2 Memory RAM Sticks

この商品に関する質問

Will the 184-pin DIMMs fit the four memory sockets on a Dell Dimension 8300?

Yes, the kit contains two 184-pin DDR SDRAM modules designed for the four DIMM slots in the Dimension 8300.

What is the correct order for installing the two 1 GB sticks so the system recognises the full 2 GB?

Populate the lowest-numbered sockets first, typically slots 1 and 2, then press each module down until the retention clips click.

Does the 2.6 V DDR400 memory require any periodic cleaning or component replacement?

No routine maintenance is needed; the unbuffered non-ECC modules have no moving parts and no heat spreader to service.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。