暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Computer Memory Solutions

Computer Memory Solutions CM2566410600DIMM1R8 4GB (2x2GB) DDR3 1333 memory upgrade

SKU CH-0HP7-WWM0S

4GB dual-channel DDR3 1333 kit for HP Elite 7100, 7200, 7300 and 8200 desktops

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 4 GB dual-channel kit boosts multitasking on Elite 7100, 7200, 7300 and 8200
  • DDR3 1333 MHz CL9 timing delivers responsive performance for everyday workloads
  • 5 V unbuffered non-ECC modules run cool without a heat spreader
  • 240-pin DIMM form factor matches factory slots for tool-free installation
  • Major-brand chipset and lifetime warranty from CMS ensure long-term reliability

Compatible HP Elite DDR3 Kit

This 4 GB kit contains two 2 GB DDR3 1333 modules built for HP Compaq Elite 7100, 7200, 7300 and 8200 desktops. Each stick is a 240-pin unbuffered DIMM rated at PC3 10600 with CL9 timing. The 1.5 V voltage matches the original platform specification.

Sustained Load Behaviour

Under continuous workloads the modules operate at the rated 1333 MHz without downclocking, because the platform memory controller locks to this speed. The 9-9-9 latency remains constant during long sessions, and the unbuffered design adds no extra register delay. Heat spreaders are absent, so airflow across the DIMM slots determines thermal stability.

DDR3 1333 Practical Limits

The DDR3 1333 interface caps bandwidth at the PC3 10600 rate, so faster modules will not run quicker in these systems. A 32-bit operating system sees only 4 GB total, while a 64-bit OS can address up to 16 GB across four slots. This kit fills two slots, leaving two free for future expansion within the platform maximum.

特長

  • 4 GB dual-channel kit boosts multitasking on Elite 7100, 7200, 7300 and 8200
  • DDR3 1333 MHz CL9 timing delivers responsive performance for everyday workloads
  • 5 V unbuffered non-ECC modules run cool without a heat spreader
  • 240-pin DIMM form factor matches factory slots for tool-free installation
  • Major-brand chipset and lifetime warranty from CMS ensure long-term reliability

仕様

BrandComputer Memory Solutions
ModelCM2566410600DIMM1R8
Capacity4GB (2 x 2GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Elite 7100, Elite 7200, Elite 7300 Elite 8200
Package Content2 Memory RAM Sticks

この商品に関する質問

How much power does the 1.5V DDR3 1333 kit draw when the system runs all day?

Each module operates at 1.5V; total draw depends on the motherboard's memory controller and workload, not on the kit itself.

What must the desktop already have to accept these 240-pin DIMMs?

A compatible HP/Compaq Elite 7100, 7200, 7300 or 8200 with free 240-pin DDR3 slots and a 64-bit OS for full 4GB use.

Will the CL9 1333MHz sticks run stably alongside any original slower DDR3 still installed?

The motherboard will clock all populated slots to the slowest module's speed and tightest common timings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。