暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 200-pin DDR2 SO-DIMM module with black chips

Computer Memory Solutions

Computer Memory Solutions CM256645300SO 2GB DDR2 667MHz 200-pin SO-DIMM memory upgrade

SKU CH-0QG7-BTRN3

2GB DDR2 667MHz 200-pin SO-DIMM upgrade for compatible Toshiba Tecra M7 laptops

  • Capacity2GB
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 2 GB capacity adds responsive multitasking headroom
  • DDR2 667 MHz speed matches original system timing
  • 200-pin SO-DIMM form factor fits Tecra M7 slots
  • CL5 5-5-5 latency keeps data flowing smoothly
  • Guaranteed compatible with Tecra M7-GH1, M7-141, M7-S7311, M7-S7331, M7-SP8013

Compatible DDR2 upgrade for Tecra M7

This 2 GB DDR2 SO-DIMM is built to match the memory slots of the Toshiba Tecra M7 series, including the GH1, 141, S7311, S7331 and SP8013 models. It installs as a single 200-pin module running at 667 MHz with CL5 timing. The unbuffered, non-ECC design suits standard notebook workloads.

Low-voltage operation at 1.8 V

The module draws power at the standard DDR2 1.8 V level, keeping heat output modest inside the Tecra chassis. With no heat spreader and no active cooling, it relies on the notebook's existing airflow. The CL5 5-5-5 timing delivers the rated PC2-5300 bandwidth without extra voltage.

Single-stick kit with lifetime guarantee

The package contains one memory stick only, so capacity scales by adding identical modules if a second slot is free. Computer Memory Solutions backs compatibility with a limited lifetime warranty when purchased directly, and the manufacturer highlights that appearance may vary from the reference photo.

特長

  • 2 GB capacity adds responsive multitasking headroom
  • DDR2 667 MHz speed matches original system timing
  • 200-pin SO-DIMM form factor fits Tecra M7 slots
  • CL5 5-5-5 latency keeps data flowing smoothly
  • Guaranteed compatible with Tecra M7-GH1, M7-141, M7-S7311, M7-S7331, M7-SP8013

仕様

BrandComputer Memory Solutions
ModelCM256645300SO
Capacity2GB
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemToshiba Tecra M7-GH1, M7-141, M7-S7311, M7-S7331, M7-SP8013
Package Content1Memory Ram Stick

この商品に関する質問

How do I install this 200-pin DDR2 SO-DIMM in my Tecra M7, and which step causes the most problems?

Power off and unplug the laptop, remove the battery, open the memory door, insert the module at a 30-degree angle until the gold contacts disappear, then press down until the side clips click — the step most people miss is pushing firmly enough to engage both clips.

What maintenance or replacement will this 2GB DDR2 module need later?

No scheduled maintenance is required; if errors appear, run a memory test and replace the stick — the limited lifetime warranty from Computer Memory Solutions covers defects when purchased directly from them.

What limit appears first when this CL5 1.8V DDR2 memory runs under sustained load?

The 667 MHz speed and CL5 latency set the bandwidth ceiling; sustained heavy workloads will hit that throughput limit before voltage or thermal constraints become an issue.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。