暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Computer Memory Solutions

Computer Memory Solutions CM4096722133ECCR 64GB (2x32GB) DDR4 2133MHz ECC Registered DIMM

SKU CH-NGCP-46KRK

ECC registered DDR4 kit delivering 64 GB across two 32 GB modules at 2133 MHz CL15 for Dell PowerEdge FC430 and Precision T5810 or T7810 workstations

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Timing15-15-15
  • Voltage1.2V
  • 64GB total capacity for demanding server workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2133MHz speed with CL15 latency
  • Validated for Dell PowerEdge FC430 and Precision T5810 T7810
  • Two 32GB modules in a matched kit

System-specific DDR4 kit

Computer Memory Solutions CM4096722133ECCR is a 64 GB kit containing two 32 GB DDR4 2133 MHz ECC registered DIMMs. It is built for Dell PowerEdge FC430 and Precision Workstation T5810 or T7810 systems that require registered, error-correcting memory. The modules run at 1.2 V with CL15 15-15-15 timings and use a 2Rx4 organisation on 288-pin PCBs.

Upgrade from non-ECC or lower capacity

The kit replaces standard unbuffered memory or smaller registered modules in the supported Dell platforms. The jump is worth it when the workload demands data integrity through ECC and the motherboard requires registered DIMMs to populate all available slots. Systems limited to unbuffered memory cannot use these modules.

64 GB capacity with 256 GB headroom

The 64 GB total handles virtualisation, large datasets and multi-user workloads comfortably within the platform limits. Each supported system accepts up to 256 GB using four sockets per CPU or eight sockets with two CPUs, so this kit leaves room for further expansion. It will not suit builds that need unbuffered memory or consumer desktop platforms.

特長

  • 64GB total capacity for demanding server workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2133MHz speed with CL15 latency
  • Validated for Dell PowerEdge FC430 and Precision T5810 T7810
  • Two 32GB modules in a matched kit

仕様

BrandComputer Memory Solutions
ModelCM4096722133ECCR
Capacity64GB (2 x 32GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Timing15-15-15
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Poweredge FC430, Precision Workstation T5810, Precision Workstation T7810
Package Content2 Memory RAM Sticks

この商品に関する質問

Will the 288-pin DDR4 DIMMs fit the Dell PowerEdge FC430 memory slots?

Yes, the 288-pin DDR4 form factor matches the FC430 slots exactly; each 32 GB module seats in a standard DDR4 DIMM socket.

What is the correct order for populating the 32 GB sticks in the Precision T5810?

Install the two modules in the two sockets belonging to the same memory channel — typically the first slot of each CPU channel — so the registered ECC timing initialises correctly.

When should the 2Rx4 registered ECC modules be replaced in a T7810 running continuous workloads?

Replace them if the system logs corrected ECC errors that climb steadily, or after the platform reaches its 256 GB maximum and you need higher capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。