暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Single green 288-pin DDR4 DIMM module with black memory chips and no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM512642133DIMM 4GB DDR4 2133MHz CL15 memory upgrade

SKU CH-5DRT-1MKA1

4GB DDR4 2133MHz CL15 unbuffered DIMM for HP ProDesk 400 G3 Microtower

  • Capacity4GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Timing15-15-15
  • Voltage1.2V
  • 4GB single module expands ProDesk 400 G3 memory capacity
  • DDR4 2133MHz CL15 timing delivers responsive system performance
  • 2V low-voltage operation reduces power draw and heat
  • 288-pin unbuffered non-ECC design ensures direct compatibility
  • Guaranteed compatible with HP ProDesk 400 G3 Microtower systems

Targeted DDR4 Upgrade for HP ProDesk 400 G3

This 4 GB DDR4-2133 module is built for the HP ProDesk 400 G3 Microtower. It runs at 1.2 V with CL15 timings and uses a standard 288-pin DIMM form factor. The stick is unbuffered, non-ECC and organised as 2Rx8. It suits office PCs that need a simple capacity boost.

Verify Slot Count and Maximum Capacity

The ProDesk 400 G3 Microtower accepts either two or four DIMM slots with a 32 GB ceiling. Count the free slots on your board before ordering. Ensure the system BIOS is current so the new module is recognised at its rated 2133 MHz speed.

Fits Microtower Chassis, Leaves Room for Expansion

The low-profile DIMM clears standard CPU coolers inside the Microtower case. Adding a single 4 GB stick keeps remaining slots open for future upgrades up to the 32 GB limit. No heat spreader means it sits flush in tight layouts without blocking adjacent components.

特長

  • 4GB single module expands ProDesk 400 G3 memory capacity
  • DDR4 2133MHz CL15 timing delivers responsive system performance
  • 2V low-voltage operation reduces power draw and heat
  • 288-pin unbuffered non-ECC design ensures direct compatibility
  • Guaranteed compatible with HP ProDesk 400 G3 Microtower systems

仕様

BrandComputer Memory Solutions
ModelCM512642133DIMM
Capacity4GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Timing15-15-15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Prodesk 400 G3 Microtower Pc
Package Content1 Memory RAM Stick

この商品に関する質問

Does the CM512642133DIMM box contain only the 288‑pin DDR4 module or are cables or tools included?

The package contains one 4GB DDR4 2133MHz CL15 288‑pin DIMM stick; no cables, brackets or tools are supplied.

Should I choose the single 4GB stick or add a second one for the ProDesk 400 G3 Microtower?

The board accepts up to 32GB across four slots, so one 4GB module works alone and a second can be added later for dual‑channel performance.

Will the CL15 2133MHz rating deliver the advertised speed once installed in the HP ProDesk 400 G3?

The module runs at DDR4‑2133 (PC4‑17000) with 15‑15‑15 timings at 1.2V, matching the system’s supported memory specification.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。