暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black low-profile DDR4 DIMMs with Vengeance heatspreaders, 288-pin, 1.03in tall

Corsair

Corsair Vengeance 2x8GB DDR4 2400MHz Desktop RAM Black

SKU CH-BQH8-3VWM7

A 16GB dual-channel DDR4 kit running at 2400MHz with 16-16-16-39 timings and a 1.03-inch low-profile heatspreader for clearance under large CPU coolers

  • 16 GB total capacity from a kit of two 8 GB modules
  • 2400 MHz speed supports responsive multitasking
  • 03 inch low-profile heatspreader fits tight builds
  • 16-16-16-39 timings deliver efficient operation
  • 288-pin DIMM design enables standard desktop installation

Kit Configuration

The Corsair Vengeance kit contains two 8GB DDR4 SDRAM modules for a total of 16GB capacity. It runs at up to 2400MHz with 16-16-16-39 latency. The 288-pin DIMM format fits standard desktop motherboards.

Low Profile Upgrade

The Vengeance heatspreader measures 1.03 inches tall, shorter than standard modules. This clears oversized CPU coolers and fits small form factor builds where taller memory would not install. The aluminium spreader keeps chips cool during sustained workloads.

Space Constrained Builders

Suits users who need 16GB of DDR4 memory but have limited clearance around the CPU socket. Builders requiring higher frequencies, lower latencies, ECC support or larger total capacities should consider other kits.

特長

  • 16 GB total capacity from a kit of two 8 GB modules
  • 2400 MHz speed supports responsive multitasking
  • 03 inch low-profile heatspreader fits tight builds
  • 16-16-16-39 timings deliver efficient operation
  • 288-pin DIMM design enables standard desktop installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How tall are the Vengeance heatspreaders on these modules?

The low-profile heatspreaders measure 1.03 inches in height, so they clear oversized CPU coolers and fit tight small-form-factor cases.

What notch position should I align when seating the 288-pin DIMMs?

Line up the single off-centre key notch on each module with the motherboard slot, press straight down until both retention clips click, and verify the modules sit evenly.

Will the heatspreaders need cleaning or replacement over time?

The anodised aluminium spreaders are passive and maintenance-free; occasional dusting with compressed air is all that is required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。