暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White mid-tower case with curved tempered glass panels and built-in ARGB PWM fans

COUGAR

COUGAR FV270 RGB White Mid Tower E-ATX PC Case

SKU CH-P54H-3RSEZ

White mid-tower E-ATX case with curved tempered-glass panels, four pre-installed ARGB PWM fans, angled airflow design and support for 420 mm GPUs

  • Panoramic curved tempered glass perimeter maximises interior visibility
  • Angled fan placement with lifted front intake creates focused, uninterrupted airflow streams
  • Four pre-installed ARGB PWM fans include two 140 mm side, one 120 mm bottom and one 140 mm rear
  • Reverse cable management layout hides wiring behind the motherboard tray for a clean interior
  • Supports E-ATX motherboards and graphics cards up to 420 mm with rotatable mounting brackets

Panoramic Curved Glass Case

The COUGAR FV270 RGB White is a mid tower chassis designed for builders who want an unobstructed view of their components. Its tempered curved glass perimeter wraps around the frame to amplify transparency and lighting brilliance. The prism-inspired polyhedral shape removes straight edges that typically block sightlines. This case targets enthusiasts assembling showcase systems with standard ATX or E-ATX motherboards.

Pre-Installed ARGB PWM Fan Array

Four addressable RGB PWM fans ship already mounted to direct airflow along angled internal faces. Two 140 mm units sit on the motherboard side, one 120 mm fan occupies the bottom, and a 140 mm exhaust fan sits at the rear. The bundled RGB hub synchronises PWM speed curves and lighting effects across all four fans without extra cables. Builders who prefer to select their own cooling configuration cannot remove the cost of these included fans.

Reverse Cable Layout With Rotatable GPU Brackets

A dedicated compartment behind the motherboard tray hides cables routed through reverse-connector boards, keeping the glass interior clean. Tool-less top and bottom brackets detach quickly for hardware swaps, while rotatable mounts allow the graphics card to sit horizontally or vertically up to 420 mm in length. Removable dust filters guard intake points but add a recurring cleaning step. The chassis does not accommodate XL-ATX or wider server boards.

特長

  • Panoramic curved tempered glass perimeter maximises interior visibility
  • Angled fan placement with lifted front intake creates focused, uninterrupted airflow streams
  • Four pre-installed ARGB PWM fans include two 140 mm side, one 120 mm bottom and one 140 mm rear
  • Reverse cable management layout hides wiring behind the motherboard tray for a clean interior
  • Supports E-ATX motherboards and graphics cards up to 420 mm with rotatable mounting brackets

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How often should the 140mm and 120mm ARGB PWM fans be cleaned or replaced?

The case includes removable dust filters on the front, top and bottom panels. Clean the filters and fan blades when dust builds up; the PWM fans are standard 120mm and 140mm units that can be swapped individually if a bearing fails.

What thermal limit appears first when the system runs under sustained load?

The angled fan layout and lifted front intake feed cool air directly to the motherboard side and bottom fans, while the rear 140mm fan exhausts heat. GPU length is capped at 420mm, so long cards fit without choking airflow.

How loud are the four pre-installed ARGB PWM fans during all-day operation?

Four ARGB PWM fans (two 140mm side, one 120mm bottom, one 140mm rear) run under motherboard PWM control, so speeds drop at low load. The tempered curved glass panels dampen noise while the angled vents keep airflow smooth.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。