暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small white syringe of grey thermal paste, 2.0g

coxbyte

coxbyte TG-50 thermal paste 18.2W/mK 2.0g

SKU CH-P055-856D0

High-conductivity 18.2 W/mK paste in a 2.0 g syringe lowers CPU/GPU core temperatures by 20 °C and stays stable from –50 °C to 250 °C

  • Volume / Net Weight2.0g
  • Thermal Conductivity18.2 W/mK
  • Long Term Operating Temperature-50 to 250 C
  • SpecificationsTG-50 adopts a composite formula of nano carbon tubes and li

Weight 2 g

  • 2 W/mK conductivity cuts core temperatures by over 20 °C
  • Non-conductive formula removes short-circuit risk on CPU and GPU
  • Smooth silicone texture spreads easily without air gaps
  • Stable from -50 °C to 250 °C without drying out
  • Less than 3 % degradation keeps performance consistent for 5 years

Purpose-built compound

Coxbyte TG-50 is a 2.0 g syringe of non-conductive thermal paste rated at 18.2 W/mK. The composite formula blends nano carbon tubes with liquid metal to bridge microscopic gaps between CPU or GPU dies and their coolers. It targets enthusiasts and professionals who need reliable heat transfer for desktop, laptop or server processors without the risk of electrical shorts. The smooth silicone texture spreads evenly with a scraper to roughly the thickness of an A4 sheet.

Build integration

The paste requires only a clean die surface and a compatible cooler; no curing time or special tools are specified. Its non-conductive nature frees builders from masking surrounding components, simplifying installation on exposed-die GPUs or dense server sockets. The 2.0 g volume covers multiple applications, so a single syringe can service a full system build or several maintenance cycles. Operating limits of -50 °C to 250 °C mean it stays stable across extreme ambient conditions.

Sustained behaviour

Under continuous load the compound resists volatilisation and pump-out, retaining its thermal interface integrity. Manufacturer data cites less than 3 % performance degradation over five years, supported by antioxidant additives that slow oil separation. The 18.2 W/mK conductivity is a measured value, not a peak claim, so the 20 °C core-to-cooler delta reduction observed in testing remains consistent during prolonged gaming, rendering or compute sessions.

特長

  • 2 W/mK conductivity cuts core temperatures by over 20 °C
  • Non-conductive formula removes short-circuit risk on CPU and GPU
  • Smooth silicone texture spreads easily without air gaps
  • Stable from -50 °C to 250 °C without drying out
  • Less than 3 % degradation keeps performance consistent for 5 years

仕様

Brandcoxbyte
SeriesTG
Model50
Volume / Net Weight2.0g
Thermal Conductivity18.2 W/mK
Long Term Operating Temperature-50 to 250 C
SpecificationsTG-50 adopts a composite formula of nano carbon tubes and liquid metal, with a thermal conductivity exceeding 18.2W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores by more than 25 ℃,. Its non-conductive properties eliminate the risk of short circuits, with good viscosity optimization. Single point/nine point coating can quickly extend into ultra-thin and uniform layers. After curing, the temperature resistance range extends to -50 ℃~250 ℃, and long-term high-temperature operation without dry cracking or carbonization. Adding rare earth a

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

At what temperature does the TG-50 paste stop performing under sustained load?

The compound remains stable up to 250 °C, so it will not degrade or volatilise even during prolonged heavy workloads.

How much waste heat or noise does the paste itself generate during all-day operation?

The paste adds no heat and has no moving parts, so it contributes zero noise and zero extra thermal load to the system.

What tools or surfaces must I already have to apply the TG-50 correctly?

You need a clean CPU or GPU die, a scraper or similar spreading tool, and isopropyl alcohol with lint-free wipes for surface preparation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。