暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR2 server module with heat spreader

Crucial

Crucial CT12872AF667 1GB DDR2 667 ECC Fully Buffered Server RAM

SKU CH-55WM-H4Q55 MPN CT12872AF667

1GB DDR2 667 ECC fully buffered server memory with CL5 timing and heat spreader

  • Capacity1GB
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5-12
  • Voltage1.80V
  • 1GB capacity for DDR2 server workloads
  • Fully buffered ECC protects data integrity
  • 667 MHz speed with CL5 latency
  • 240-pin DDR2 SDRAM form factor
  • 80 V operation for power efficiency

1GB DDR2 Fully Buffered Module

This 1GB DDR2 module is built for servers that require fully buffered ECC memory. It runs at 667 MHz with a CAS latency of CL5 and operates at 1.80V. The 240-pin form factor fits compatible DDR2 server platforms.

Suited for legacy server maintenance

This module suits administrators maintaining older DDR2 servers that specifically call for fully buffered ECC DIMMs. It is not for builders working with unbuffered or registered DDR2 systems, nor for any platform that uses a different memory generation.

Capacity and headroom

The single 1GB stick provides a modest capacity bump for supported configurations. It handles light server workloads and basic virtualization within that limit. Larger datasets or multi-VM environments will exhaust the available memory quickly.

特長

  • 1GB capacity for DDR2 server workloads
  • Fully buffered ECC protects data integrity
  • 667 MHz speed with CL5 latency
  • 240-pin DDR2 SDRAM form factor
  • 80 V operation for power efficiency

仕様

BrandCrucial
ModelCT12872AF667
Capacity1GB
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5-12
Voltage1.80V
ECCYes
Buffered/RegisteredFully Buffered
Heat SpreaderYes
配送重量0.09 kg
梱包サイズ165 × 71 × 10 mm

この商品に関する質問

What motherboard slot and chipset are required for this 240-pin DDR2 667 fully buffered ECC module?

The module fits a 240-pin DDR2 socket and needs a chipset that supports fully buffered ECC DDR2 667 (PC2 5300) at 1.80 V with CL5 5-5-5-12 timing.

Will this CT12872AF667 run at its rated speed if the server currently uses DDR2 667 registered (not fully buffered) memory?

No, fully buffered and registered DDR2 use different electrical interfaces and cannot be mixed; the system must support fully buffered DIMMs.

How can I confirm the module is operating at DDR2 667 with ECC active after installation?

Check the BIOS memory information or OS hardware report for 667 MT/s, CL5 5-5-5-12 timings, 1.80 V and ECC enabled status.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。