暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black 288-pin UDIMM modules in a 32GB kit

Crucial

Crucial FF2D532G6400HC32ADC01 32GB DDR5 6400MT/s CL32 desktop RAM

SKU CH-89EZ-FQQDZ MPN FF2D532G6400HC32ADC01

A 32 GB DDR5 kit with two 16 GB modules running at 5600 MT/s CL46 and 1.1 V, compatible with 13th Gen Intel Core and Ryzen 7000 Series platforms

  • 32GB total capacity from two 16GB modules
  • 5600MT/s DDR5 speed with downclock support to 5200MT/s or 4800MT/s
  • CAS latency 46 for responsive performance
  • Intel XMP 3.0 and AMD EXPO profiles on the same module
  • 1V operation on standard 288-pin UDIMM form factor

32GB DDR5 kit for Intel 13th Gen and AMD Ryzen 7000

This Crucial kit delivers 32GB of DDR5 memory across two 16GB UDIMM modules. It is designed for desktop systems built around 13th Gen Intel Core and AMD Ryzen 7000 Series processors. The memory operates at 5600MT/s with a CAS latency of 46 and runs at 1.1V.

Simple 288-pin installation

Installation follows the standard 288-pin UDIMM process; seat each module firmly until the retention clips click. The kit supports both Intel XMP 3.0 and AMD EXPO on the same modules, allowing the system to configure timings automatically. If the platform only supports 5200MT/s or 4800MT/s, the memory will downclock without user intervention.

Verify DDR5 UDIMM support

Confirm that the motherboard accepts DDR5 UDIMM memory and has two available DIMM slots for the 2x16GB configuration. The kit is rated for PC5-44800 at 5600MT/s with CL46, so the board must be capable of that data rate or a lower supported speed. Non-ECC 1Rx8 organisation is used, so ensure the platform does not require registered or ECC modules.

特長

  • 32GB total capacity from two 16GB modules
  • 5600MT/s DDR5 speed with downclock support to 5200MT/s or 4800MT/s
  • CAS latency 46 for responsive performance
  • Intel XMP 3.0 and AMD EXPO profiles on the same module
  • 1V operation on standard 288-pin UDIMM form factor

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I confirm the kit is running at 5600MT/s with CL46 after installation?

Enable Intel XMP 3.0 or AMD EXPO in the BIOS, then verify the reported speed shows 5600MT/s and latency CL46; the modules will downclock to 5200MT/s or 4800MT/s automatically if the platform only supports those speeds

What exactly ships in the box and is anything else required?

The box contains two 16GB UDIMM modules (288-pin, 1.1V, non-ECC, 1Rx8) for a total of 32GB; no extra cables, brackets or software are needed — just a DDR5-compatible motherboard with free DIMM slots

The listing mentions 6400MT/s in the model name but the specifications show 5600MT/s — which version should I choose?

The kit is rated for 5600MT/s (PC5-44800) with CL46; the higher figure in the model code does not represent a selectable speed option, so choose this kit when your CPU and motherboard support DDR5-5600 or lower speeds such as 5200MT/s or 4800MT/s

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。