Crucial
Crucial MTFDKCB6T4TFS-1BC1ZABYYR 6400 GB internal SSD
Enterprise mixed-use drive with 6400 GB capacity, 176-layer NAND, PCIe 4.0 x4 and NVMe in a 2.5" U.3 form factor
- Device TypeInternal Solid State Drive (SSD)
- Enterprise mixed-use endurance for sustained data-centre workloads
- 176-layer NAND with CuA technology accelerates read and write speeds
- PCIe 4.0 x4 interface delivers up to 1 million IOPS
- 5-inch U.3 form factor fits standard server bays
- Secure Execution Environment helps protect stored data
Capacity and form factor
The Crucial MTFDKCB6T4TFS-1BC1ZABYYR is a 6400 GB internal SSD built on Micron 176-layer NAND. It uses a 2.5 inch U.3 form factor with a PCIe 4.0 x4 NVMe interface for data centre deployment.
Enterprise mixed-use fit
This drive suits operators who need consistent sub-2ms QoS latency for boot, cache or main data storage in hyperscale or cloud infrastructure. Builders limited to M.2 slots or consumer desktop platforms should look at other form factors.
U.3 PCIe 4.0 x4 interface
The U.3 connector carrying PCIe 4.0 x4 NVMe is the single specification that decides compatibility; the system backplane must provide a U.3 bay with four PCIe 4.0 lanes for the drive to operate.
特長
- Enterprise mixed-use endurance for sustained data-centre workloads
- 176-layer NAND with CuA technology accelerates read and write speeds
- PCIe 4.0 x4 interface delivers up to 1 million IOPS
- 5-inch U.3 form factor fits standard server bays
- Secure Execution Environment helps protect stored data
仕様
| Device Type | Internal Solid State Drive (SSD) |
|---|---|
| 配送重量 | 0.11 kg |
| 梱包サイズ | 25 × 23 × 8 mm |
この商品に関する質問
What interface and form factor does the MTFDKCB6T4TFS-1BC1ZABYYR need on the host system?
The drive requires a U.3 PCIe 4.0 x4 slot in a 2.5-inch bay and uses the NVMe protocol.
Can the 7450 series SSD share a backplane with older PCIe 3.0 drives?
Yes, the PCIe 4.0 x4 interface is backward compatible so the SSD will operate at PCIe 3.0 speeds on an older backplane.
How can I verify the 176-layer NAND SSD is delivering its rated performance after installation?
Run an NVMe health tool to confirm the drive reports a PCIe 4.0 x4 link and check that latency remains consistently low under load.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM



