Crucial
Crucial P2 CT2000P2SSD8 2TB internal SSD
M.2 2280 internal SSD with 2TB capacity and NVMe PCIe 3.0 interface delivering up to 2400 MB/s read and 1900 MB/s write speeds
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4 NVMe
- 2TB capacity stores large game libraries and media files
- Up to 2400 MB/s sequential read accelerates boot and load times
- Up to 1900 MB/s sequential write speeds up file transfers and saves
- 600 TBW endurance rating supports heavy daily workloads
- 5 million hours MTTF indicates long-term drive reliability
P2 2TB NVMe drive for everyday builds
The Crucial P2 CT2000P2SSD8 is a 2TB M.2 2280 SSD that uses 3D NAND and a PCI-Express 3.0 x4 NVMe interface. Sequential reads reach up to 2400 MBps and writes up to 1900 MBps. It is rated for 600 TBW and 1.5 million hours MTTF.
Suits general upgrades not heavy write workloads
This drive fits mainstream laptops and desktops where capacity and cost matter more than sustained throughput. Content creators moving large video files or users running write-intensive databases should consider drives with higher endurance or faster sequential speeds.
PCI-Express 3.0 x4 NVMe interface
The x4 lane NVMe connection on the PCIe 3.0 bus sets the ceiling for the 2400 MBps read and 1900 MBps write figures. Confirm the motherboard or laptop slot supports PCIe 3.0 x4 NVMe before purchase.
特長
- 2TB capacity stores large game libraries and media files
- Up to 2400 MB/s sequential read accelerates boot and load times
- Up to 1900 MB/s sequential write speeds up file transfers and saves
- 600 TBW endurance rating supports heavy daily workloads
- 5 million hours MTTF indicates long-term drive reliability
仕様
| Brand | Crucial |
|---|---|
| Series | P2 |
| Model | CT2000P2SSD8 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 NVMe |
| Max Sequential Read | Up to 2400 MBps |
| Max Sequential Write | Up to 1900 MBps |
| Terabytes Written (TBW) | 600TB |
| MTTF | 1.5 million hours |
| Features | Capacity: Up to 2TB with sequential reads/writes up to 2400/1900 MB/s NVMe PCIe interface, marking the next step in storage innovation Includes SSD management software for performance optimization, data security, and firmware updates |
| Operating Temperature | 0°C ~ +70°C |
| 配送重量 | 0.04 kg |
| 梱包サイズ | 130 × 97 × 13 mm |
このモデルの他のバージョン
同シリーズにさらに 3点
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Crucial CT1000P2SSD8 1TB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
この商品に関する質問
Does the M.2 2280 form factor fit a standard motherboard slot?
The drive uses the M.2 2280 form factor which matches the common 80 mm motherboard slot used by most current desktops and laptops.
What is the correct way to secure the drive after inserting it into the PCIe 3.0 x4 slot?
Insert the drive at an angle, press it down flat, and fasten the single retention screw; the step often missed is tightening that screw so the drive cannot lift under thermal cycling.
When should I expect to replace the drive based on the 600TB endurance rating?
The 600TB TBW rating means the 2TB model is warrantied for up to 600 terabytes of data written; typical consumer workloads reach that point after many years of daily use.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM






