暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black mid-tower case with mesh front panel, three white infinity-mirror 120 mm fans behind glass, four black 120 mm fans visible inside

DARKROCK

DARKROCK Classico Max Storage Master E-ATX PC Case Black 10x3.5 3x2.5 3x120mm White Infinity 4x120mm Black Fan

SKU CH-Q037-3ZAWW

E-ATX mid-tower with mesh panels, vertical GPU mounting, top 360 mm radiator support and 13 drive bays

  • TypeE-ATX Mid Tower Chassis
  • ColorBlack
  • Motherboard CompatibilityMicro ATX / ATX / Extended ATX
  • Dust FiltersYes
  • Expansion Slots7
  • Max GPU Length400 mm
  • Massive storage capacity with support for 13 drives including 10 x 3.5 and 3 x 2.5 bays
  • Vertical GPU mounting via three slots creates parallel airflow for improved cooling performance
  • Fits E-ATX, ATX, Micro-ATX and ITX boards with drive cages removed for larger layouts
  • Top-mounted 360 mm radiator support handles high-heat liquid cooling configurations
  • Mesh panels combined with pre-installed 120 mm ARGB Infinity fans deliver strong airflow and layered lighting effects

Storage-focused E-ATX chassis

The DARKROCK Classico Max is an E-ATX mid-tower designed for builders who need massive local storage. It accommodates up to 13 drives using ten 3.5-inch bays and three 2.5-inch bays, plus USB 3.0 front-panel connectivity.

Suits multi-drive workstations, not compact builds

This case suits users running large media libraries, backup arrays or Chia plotting rigs that benefit from dense mechanical storage. Builders wanting a small-form-factor case or a layout optimised for dual-slot GPUs without vertical mounting should look elsewhere.

Handles 13 drives and 360 mm top radiator

The interior fits graphics cards up to 400 mm long and CPU coolers up to 180 mm tall, with a 200 mm power-supply limit. Seven expansion slots support vertical GPU mounting via three dedicated brackets. A 360 mm radiator mounts in the roof, while mesh panels and seven pre-installed 120 mm fans (three white infinity, four black) provide high airflow headroom for dense drive stacks.

特長

  • Massive storage capacity with support for 13 drives including 10 x 3.5 and 3 x 2.5 bays
  • Vertical GPU mounting via three slots creates parallel airflow for improved cooling performance
  • Fits E-ATX, ATX, Micro-ATX and ITX boards with drive cages removed for larger layouts
  • Top-mounted 360 mm radiator support handles high-heat liquid cooling configurations
  • Mesh panels combined with pre-installed 120 mm ARGB Infinity fans deliver strong airflow and layered lighting effects

仕様

TypeE-ATX Mid Tower Chassis
ColorBlack
Motherboard CompatibilityMicro ATX / ATX / Extended ATX
Dust FiltersYes
Expansion Slots7
Max GPU Length400 mm
Max CPU Cooler Height180 mm
Max PSU Length200 mm

この商品に関する質問

Which motherboard form factors fit the DARKROCK Classico Max without removing the drive cages?

Micro-ATX, ATX and ITX boards install with the cages in place; fitting an E-ATX board requires removing the hard-drive cages first.

Will a graphics card up to 400 mm long clear the front fans when mounted vertically?

Yes, the three vertical slots and parallel front-to-rear airflow ducts are designed for cards up to 400 mm in vertical orientation.

How can I verify the ARGB infinity-mirror fans are running and lit after assembly?

Connect the fans to a 5 V ARGB header and a fan header on the motherboard, then confirm both lighting effects and fan rotation in the BIOS or RGB control software.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。