暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three black 120mm case fans with infinity mirror centers, ARGB lighting on blades and frames, and a 20-port controller hub

DARKROCK

DARKROCK F120 3-in-1 120mm Infinite Mirror case fan kit, 20-port hub, 24 LED, PWM, ARGB, Hydro Bearing, Black

SKU CH-GD28-SBP1V

Three 120 mm fans with infinite-mirror ARGB lighting, a 20-port hub for 10 PWM and 10 ARGB devices, hydro bearings running 800–1600 RPM at up to 46.7 CFM and 27.7 dBA

  • Fan Counts3 Fans
  • Fan ControllerController, Remote
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • Infinite mirror design creates layered lighting depth across 24 LEDs per fan
  • 20-port hub controls up to 10 PWM fans and 10 ARGB fans simultaneously
  • PWM speed range 800-1600 RPM delivers 46.7 CFM maximum airflow
  • Hydro bearing plus eight rubber pads limit noise to 27.7 dBA at full speed
  • SATA-powered hub provides stable power delivery for precise fan control

Kit contents and target builder

The kit supplies three 120mm case fans, a 20-port controller hub and a remote. It suits builders who want synchronised ARGB lighting and centralised PWM speed control across multiple intake or exhaust positions.

Upgrade path and when it matters

The hub replaces separate fan headers and lighting cables by offering ten PWM and ten ARGB ports powered through SATA. The jump is worthwhile when the motherboard lacks enough 4-pin or 5V 3-pin connectors for a full chassis layout.

Airflow capacity and practical limits

Each fan moves up to 46.7 CFM at 1600 RPM while peaking at 27.7 dBA, with a 800 RPM floor for quieter operation. The hydro bearing and rubber pads keep vibration low, but the 25mm thickness and fixed 120mm frame restrict use to standard mounting points.

特長

  • Infinite mirror design creates layered lighting depth across 24 LEDs per fan
  • 20-port hub controls up to 10 PWM fans and 10 ARGB fans simultaneously
  • PWM speed range 800-1600 RPM delivers 46.7 CFM maximum airflow
  • Hydro bearing plus eight rubber pads limit noise to 27.7 dBA at full speed
  • SATA-powered hub provides stable power delivery for precise fan control

仕様

BrandDARKROCK
Fan Counts3 Fans
Fan ControllerController, Remote
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM800-1600 RPM
Air Flow46.7 CFM (Max)
Noise Level27.7 dBA (Max)
Power Connector4 Pin
ColorBlack
Dimensions120 x 120 x 25mm

この商品に関する質問

Will three 120 mm fans with 25 mm thickness fit my case's front panel?

Each fan measures 120 x 120 x 25 mm, so verify your case has three adjacent 120 mm mounts with at least 25 mm clearance per slot.

How do I connect the 20-port hub so both PWM and ARGB work, and what step is often missed?

Plug the hub into a SATA power connector from the PSU, attach up to ten 4-pin PWM fans to the PWM ports and up to ten 5V 3-pin ARGB fans to the ARGB ports, then link the hub's motherboard ARGB header — forgetting the SATA power is the common mistake.

When will the hydro bearing fans or the 24 LEDs need attention?

The hydro bearing is rated for long life with no lubrication required; the 24 LEDs per fan are solid-state and need no replacement, so only occasional dust cleaning is expected.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。