暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two black 120mm case fans with infinity mirror centres and ARGB lit blades, shown front and side

DARKROCK

DARKROCK R120 2-Pack 120mm Reverse Infinity Mirror ARGB Case Fan Black

SKU CH-3ST8-JXR2P

Two 120 mm case fans with reverse-mounted blades, infinity-mirror ARGB lighting on frame and blades, hydraulic bearings, and PWM speed control from 800 to 1600 RPM for 46.7 CFM airflow at 27.7 dBA

  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase, CPU Coolers
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing

Model Reverse blade

Option 2 Packs

  • Reverse blades push air out the front for cleaner intake paths
  • Infinity mirror panels on frame and hub create layered lighting depth
  • Addressable RGB on both frame and blades lets you match any colour scheme
  • PWM auto-adjusts 800-1600 RPM for 46.7 CFM peak airflow
  • Hydro bearing plus eight rubber pads keeps noise to 27.7 dBA max

Reverse infinity mirror ARGB fans

This two-pack of 120 mm case fans uses a reverse blade layout that presents the illuminated face forward while directing airflow out the front. Addressable RGB runs along both the frame and the blades for full chassis colour coordination. The hydraulic bearing and eight rubber pads keep vibration low. PWM control lets the motherboard manage speed automatically.

Airflow capacity and limits

Each fan moves up to 46.7 CFM at 1600 RPM, giving ample throughput for typical mid-tower intake or exhaust duties. The 800 RPM floor provides quiet idle cooling for light workloads. Dense radiator stacks or heavily restricted front panels will push the fans toward their maximum speed to maintain pressure. Builds needing substantially higher static pressure should consider additional or larger fans.

Thermals noise and power draw

At full speed the fans reach 27.7 dBA, staying unobtrusive in most desktop environments. The hydraulic bearing maintains consistent acoustic character across the 800 to 1600 RPM range. Power comes from a standard 3-pin connector, drawing minimal current from the motherboard header. Rubber corner pads further decouple vibration from the case chassis.

特長

  • Reverse blades push air out the front for cleaner intake paths
  • Infinity mirror panels on frame and hub create layered lighting depth
  • Addressable RGB on both frame and blades lets you match any colour scheme
  • PWM auto-adjusts 800-1600 RPM for 46.7 CFM peak airflow
  • Hydro bearing plus eight rubber pads keeps noise to 27.7 dBA max

仕様

Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase, CPU Coolers
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM800-1600
Air Flow46.7 CFM (Max)
Noise Level27.7 dBA (Max)
Power Connector3 Pin
ColorBlack
LEDARGB
Dimensions120 x 120 x 25mm

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 120 mm reverse-blade fans fit alongside my existing 120 mm fans without changing airflow direction?

The reverse mounting design makes the front the air outlet, so pairing them with standard fans will push air in opposite directions; plan intake and exhaust sides accordingly.

How can I verify the ARGB infinity mirror lighting and PWM speed control are working after installation?

Connect the 3-pin ARGB header to a compatible motherboard or controller — the infinity mirror effect on the frame and blades should illuminate, and fan speed will auto-adjust between 800 and 1600 RPM.

The pack includes two fans — are mounting screws, rubber pads or an ARGB controller supplied, or must I buy them separately?

Each fan comes with eight rubber anti-vibration pads pre-installed; mounting screws and an ARGB controller are not included and must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。