暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SATA hard drive mounted in a black tray

DELL

DELL 2G4HM 2 TB 7200 RPM 3.5" SATA internal hard drive with tray

SKU CH-J2AD-3AXMZ

Enterprise-grade 2 TB SATA drive spins at 7200 RPM in a 3.5-inch form factor and ships with a Dell PowerEdge/PowerVault tray

  • 2 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SATA interface integrates with standard controllers
  • 5 inch form factor fits enterprise bays
  • Included tray enables quick installation in PowerEdge and PowerVault systems

Purpose-built enterprise storage

This 2 TB 7200 RPM SATA drive is designed for Dell PowerEdge and PowerVault servers. It ships with the required mounting tray for direct installation into supported chassis bays.

Upgrade path and fit

It replaces a failed or smaller-capacity 3.5 inch SATA drive in compatible Dell enterprise arrays. The jump is worth it when a bay is empty or when a rebuild demands a matching spindle speed and tray form factor.

Installation notes

The included tray aligns with the server’s hot-swap sled rails so the drive seats without tools. The usual issue is inserting the assembly into a bay that expects a different tray keying or a 2.5 inch form factor.

特長

  • 2 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SATA interface integrates with standard controllers
  • 5 inch form factor fits enterprise bays
  • Included tray enables quick installation in PowerEdge and PowerVault systems

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 3.5-inch drive with its tray fit my Dell PowerEdge or PowerVault bay?

Yes, the included tray is built for Dell PowerEdge and PowerVault hot-swap bays, so the 3.5-inch drive slides straight in.

How do I install the SATA drive in the tray, and what step is often missed?

Secure the drive to the tray with the four side screws, then insert the assembly until the lever clicks; the step often missed is fully latching the lever to engage the backplane connector.

What maintenance or replacement should I plan for this 7200 RPM drive?

Monitor SMART health and keep firmware current; expect to replace the drive after its rated workload limit or if reallocated sectors start to rise.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。