暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
A 2.5 inch Dell SAS solid state drive with a metal casing

DELL

DELL 3.84TB SAS 12G 2.5in SSD PX04SRB384

SKU CH-RT9P-8BTR7

A 3.84 TB SAS solid-state drive with a 2.5 inch form factor and 12 Gb/s interface

  • 84TB capacity stores large datasets
  • SAS 12Gb/s interface delivers fast data throughput
  • 5-inch form factor fits dense server bays
  • Original Dell part ensures system compatibility
  • New condition guarantees full rated performance

Dell 3.84TB SAS 12G SFF SSD

This is a new Dell internal solid-state drive with a 3.84TB capacity and a 2.5in SAS 12Gb/s interface. It uses the manufacturer part number PX04SRB384 and ships as an original Dell model. The drive weighs 1.0 pound and carries a 1 Year warranty from the supplier.

Servers needing high-capacity SAS storage

This drive suits servers and storage arrays that accept 2.5in SAS drives running at 12Gb/s and require 3.84TB of flash capacity. It is not for systems that lack a SAS backplane or that cannot accommodate a 2.5in small form factor device. Builders who need a different interface protocol or a larger physical drive format should look at other parts.

Interface is 2.5in SAS 12Gb/s

The single specification that decides fitment is the 2.5in SAS 12Gb/s interface. The host must provide a compatible SAS connector and support the 12Gb/s signalling rate for the drive to operate. Verify the backplane and controller match this interface before purchase.

特長

  • 84TB capacity stores large datasets
  • SAS 12Gb/s interface delivers fast data throughput
  • 5-inch form factor fits dense server bays
  • Original Dell part ensures system compatibility
  • New condition guarantees full rated performance

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does my server need a 12 Gb/s SAS backplane or HBA to use this PX04SRB384 drive?

Yes, the drive uses a 2.5" SAS 12Gb/s interface, so the host system must provide a compatible 12 Gb/s SAS connection.

Will this 2.5" SAS SSD work in a chassis that currently holds 3.5" SAS hard drives?

Only if the chassis has 2.5" drive bays or an adapter; the PX04SRB384 is a 2.5" SFF device and does not fit a native 3.5" slot.

How can I verify the drive is running at 12 Gb/s after installation?

Check the negotiated link speed in the RAID controller BIOS or OS utility; it should report 12 Gb/s for the PX04SRB384.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。