暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
2.5 inch SAS SSD in silver metal caddy

DELL

DELL 3.84TB SAS 2.5" 12G MU enterprise SSD with caddy

SKU CH-H07V-7M7Y8

3.84 TB SAS 12 Gbps enterprise SSD in 2.5 inch form factor with Dell caddy for PowerEdge R210 through R930 servers

  • 84 TB capacity supports large mixed-use workloads
  • SAS 12 Gb/s interface delivers high throughput for enterprise servers
  • 5 inch form factor fits dense drive bays
  • Mixed-use endurance balances read and write performance
  • Compatible Dell caddy enables direct installation in listed PowerEdge models

3.84TB SAS 12G Enterprise SSD

This 3.84TB SAS drive operates at 12Gb/s and uses a 2.5 inch form factor. It is built for mixed-use workloads in Dell PowerEdge servers. A compatible Dell caddy is included for direct installation.

Suits Dell PowerEdge R210 through R930

The drive fits the listed PowerEdge models from the R210 generation one and two up to the R930. It is not for systems that lack a 12Gb/s SAS backplane or a 2.5 inch drive bay. It also does not suit environments that need a drive without a supplied caddy.

12Gb/s SAS interface

The single specification that decides compatibility is the 12Gb/s SAS interface. The server backplane and controller must support this speed and protocol for the drive to function correctly.

特長

  • 84 TB capacity supports large mixed-use workloads
  • SAS 12 Gb/s interface delivers high throughput for enterprise servers
  • 5 inch form factor fits dense drive bays
  • Mixed-use endurance balances read and write performance
  • Compatible Dell caddy enables direct installation in listed PowerEdge models

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the 2.5 inch caddy fit a PowerEdge R720 drive bay?

The included caddy is compatible with the R720 and R720XD among many other PowerEdge models.

What is the correct way to seat the SAS drive in the caddy before sliding it into the server?

Attach the drive to the caddy using the supplied screws, then insert the assembly until the release lever clicks into the locked position.

When should the 3.84TB mixed-use SSD be replaced in a write-heavy workload?

Monitor the drive health via the PERC controller and replace it once the media wear indicator approaches the rated endurance limit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。