暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SAS hard drive labelled 300GB 10000 RPM 740Y7

DELL

DELL 300GB 10000 RPM SAS 2.5" 512n (740Y7)

SKU CH-TARF-DAAPF

A 2.5-inch SAS hard drive spinning at 10000 RPM with 300 GB capacity and 512n sector format

  • InterfaceSAS 6Gb/s
  • Capacity300GB
  • RPM10000 RPM
  • 10,000 RPM spindle speed for rapid data access
  • SAS 6Gb/s interface delivers 6 Gb/s transfer rates
  • 300 GB capacity stores critical workloads
  • 5 inch form factor fits dense server bays
  • 512n native sector format ensures broad compatibility

Dell 300GB 10K SAS Drive

The Dell 300GB 10000 RPM SAS drive fits a 2.5 inch bay and connects through a SAS 6Gb/s interface. It uses a 512n sector format and carries Dell part number 740Y7. The spindle speed supports transactional workloads in compatible servers or storage arrays.

Suits SAS storage bays only

This drive suits systems with native SAS backplanes or controllers that accept a 2.5 inch form factor. It is not for platforms that lack SAS connectivity or cannot power a 10000 RPM spindle. Buyers needing larger capacities should consider other models.

SAS 6Gb/s interface decides fit

The single specification that decides compatibility is the SAS 6Gb/s interface. The host must provide a SAS port and backplane power for a 2.5 inch drive. Without that interface the drive cannot be installed or recognised.

特長

  • 10,000 RPM spindle speed for rapid data access
  • SAS 6Gb/s interface delivers 6 Gb/s transfer rates
  • 300 GB capacity stores critical workloads
  • 5 inch form factor fits dense server bays
  • 512n native sector format ensures broad compatibility

仕様

Brand740Y7
InterfaceSAS 6Gb/s
Capacity300GB
RPM10000 RPM

この商品に関する質問

Will this 2.5" 300 GB SAS drive fit the 2.5" bay in my server chassis?

Yes, the drive is built for a standard 2.5" bay and uses a SAS interface, so it mounts directly in any chassis that accepts 2.5" SAS devices.

Can this 10,000 rpm SAS drive share a backplane with slower SAS drives I already own?

The drive runs at 6 Gb/s SAS; a backplane that supports that speed will negotiate the link automatically with slower SAS drives on the same bus.

How do I confirm the 512 n sector format is active after installation?

Check the drive properties in your OS or RAID utility — it will report 512 bytes per sector if the 512 n format is operating correctly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。